No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


NAT Server Fails to Be Configured on an AR Router Due to an IP Address Conflict

Publication Date:  2015-08-19 Views:  3695 Downloads:  0
Issue Description
When the nat server command is run on an AR router, the system displays the following error message:

[Huawei-GigabitEthernet0/0/0] nat server protocol tcp global 9008 inside 8080                                
  Error: The address conflicts with interface or ARP IP. 

The main configuration of the AR router is as follows:

interface GigabitEthernet0/0/0
ip address     
nat server protocol tcp global current-interface 2121 inside 2121
nat server protocol tcp global current-interface www inside 8008
nat outbound 2000
interface GigabitEthernet0/0/1
ip address
interface GigabitEthernet0/0/2
ip address
nat outbound 2000
Handling Process
1. The configuration of GE0/0/0 shows that the IP address is not used. The IP address may be used by another interface. Change the IP address and run the nat server command again.

[Huawei-GigabitEthernet0/0/0] nat server protocol tcp global 9008 inside 8080                                

The changed public IP address successfully maps the private IP address.

2. Run the display arp command to check ARP entries on the router. The IP address is in the ARP table, indicating that the IP address has been used.

<Huawei> display arp                                                                                                                    
IP ADDRESS      MAC ADDRESS     EXPIRE(M) TYPE        INTERFACE   VPN-INSTANCE                                                      
                                          VLAN/CEVLAN PVC                                                                           
------------------------------------------------------------------------------                                                     0819-a6cd-a895            I -         GE0/0/0                                                                      5489-98f4-5a8e  19        D-0         GE0/0/0                                                                      0819-a6cd-a896            I -         GE0/0/1                                                                      0819-a6cd-a897            I -         GE0/0/2                                                                     5489-9874-b897            I -         Eth1/0/1                                                                  0819-a6cd-a894            I -         Vlanif10                                                                    0819-a6cd-a894            I -         Eth-Trunk10                                                                   
Total:7         Dynamic:1       Static:0     Interface:6            
If an IP address conflict occurs when NAT server is correctly configured, check whether the IP address is correct. For example, the IP address has been used on another device in this example.