No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


How do I configure a 4G interface on an AR

Publication Date:  2016-11-24 Views:  903 Downloads:  0

Issue Description

How do I configure a 4G interface on an AR


"The procedure for configuring an LTE interface is as follows:
[Huawei] apn profile lteprofile  //Create an APN profile.
[Huawei-apn-profile-lteprofile] apn 3GNET
[Huawei-apn-profile-lteprofile] user name lteuser password cipher Password@123 authentication-mode auto
[Huawei-apn-profile-lteprofile] quit
[Huawei] dialer-rule           //Configure a dialer ACL.
[Huawei-dialer-rule] dialer-rule 1 ip permit  
[Huawei-dialer-rule] quit
[Huawei] interface cellular 0/0/0
[Huawei-Cellular0/0/0] link-protocol ppp
[Huawei-Cellular0/0/0] ip address negotiate   //Configure an LTE cellular interface to dynamically obtain an IP address.
[Huawei-Cellular0/0/0] ppp ipcp dns request       //Configure a DNS server address through PPP negotiation.
[Huawei-Cellular0/0/0] dialer enable-circular     //Enable C-DCC.
[Huawei-Cellular0/0/0] dialer-group 1       //Associate Cellular0/0/0 with the dialer ACL.
[Huawei-Cellular0/0/0] dialer number *99#    //Configure a dialer number for calling the remote end.
[Huawei-Cellular0/0/0] mode lte auto   //Configure a network connection mode.
[Huawei-Cellular0/0/0] apn-profile lteprofile  //Bind the APN profile to the LTE cellular interface.
[Huawei-Cellular0/0/0] shutdown
[Huawei-Cellular0/0/0] undo shutdown
[Huawei-Cellular0/0/0] quit"