No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


What's the measure to meet ESD Protection Requirements

Publication Date:  2016-12-02 Views:  1084 Downloads:  0
Issue Description
What's the measure to meet ESD Protection Requirements
To meet ESD protection requirements, take the following measures:

Popularize the importance of ESD prevention.

Wear ESD shoes and ESD clothing before entering the TR. Use ESD tools such as ESD wrist straps, ESD tweezers, and extraction tools when operating on the server.

Lay a raised floor in the TR.

Ground all conducting materials in the TR, including computers, and set up ESD worktables.

Keep non-ESD materials (such as common bags, foams, and rubbers) at least 30 centimeters away from ESD-sensitive components.

Ground the server properly. Although laying the raised floor covered with semiconductive materials, use copper foil for grounding at a number of points on the floor (the copper foil should be placed between the concrete floor and the semiconductive floor and should be connected to a ground cable).

Take dust prevention measures. Dust or other particles in the TR may cause poor connections between connectors or between metal connecting points.

Maintain proper humidity. Too high humidity may make metal components rusty, while too low humidity may induce static electricity.