No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Knowledge Base

How to clear an alarm in eOMC

Publication Date:  2017-10-18  |   Views:  873  |   Downloads:  3  |   Author:  m84067882  |   Document ID:  EKB1000952012


Issue Description

The customer wants to clear an alarm in eOMC. Please keep in mind that the alarm will reappear after the eNodeB will be restarted. 


To query the serial number of the active alarm to be cleared, run the LST ALMAF command:

The next step is to acknowledge (ACK) the alarm in alarm monitor tab -> right click on the alarm -> ACK

 If you want to hide/clear the alarm you need run the command: RMV ALMFLT and write the serial no which indicates the serial number of an alarm, which is arranged on the basis of the time when the alarm is generated. The serial number of an alarm is the only index in the alarm logs (the below picture). 

Press Execute buttom and accept. The alarm will be cleared.