No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Knowledge Base

How to set JBOD on LSI3108

Publication Date:  2018-02-10  |   Views:  1230  |   Downloads:  0  |   Author:  c84083176  |   Document ID:  EKB1001302295


Issue Description

JBOD can be configured only when the controller card firmware version is 6121 or later and the server has been installed with the driver matching the firmware version.

Handling Process

During server startup, press Ctrl+R when prompted

The SAS3108 BIOS Configuration Utility screen is displayed, with the menu bar on the top


Navigate to Ctrl Mgmt, check "Enable JBOD" and "Apply"



Return to PD Mgmt and all disks that don't belong to any RAID configuration will be marked as JBOD


This workaround is applied to all Huawei Servers equipped with LSI 3108