When installing the Cloud VC on a server and in the document states that you need to upload the software through LMT as Software (auto loading):
Then it says that you need to add the VM with the following command:
1. In the MML Command - CGP window, run the ADD VM command.
ADD VM: VMNAME="smc_vm", DEPLOYTYPE=HOST, SERVERNAME="omu_server1", NUMANUM=0, CPUNUM=16, MEMSIZE=32768, IMGNAME1="VMCU0BMS01V600R006C00SPC400.img", VDISKSIZE2=400, APPDESC="win2012_for_smc_sc_eua", VNIC1=Port2, VNIC2=Port4, GUESTOSTYPE=Windows;
After inserting the command we have the following error that the file “VMCU0BMS01V600R006C00SPC400.img” is not found:
To check this information I have to input the following command: LST VMIMG but the image is not loaded as you can see in the below picture.
However, when I have uploaded the software package for example: VMCU0BMS01V600R006C00SPC***.tar.gz as Virtual machine image:
Inserted again the command LST VMIMG to check if the image was loaded properly:
Then added the VM successfully:
The file that you need to upload is an image of the SMC2.0 and vMCU and not as Software package.