No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Knowledge Base

VSYS GUI Interface view

Publication Date:  2018-03-29  |   Views:  429  |   Downloads:  0  |   Author:  f84038637  |   Document ID:  EKB1001443486

Contents

Issue Description

USG9520, version V500R001C60 

When going to the interface view of one of the VSYS we can see one physical IF 3/1/7 with two subinterfaces below, inside and outside. So in the view it looks like both inside and outside interfaces belong to 3/1/7. But in this case inside belong to 3/1/7 and outside belong to 3/1/9, so this can easily confuse the users to believe that both belong to 3/1/7. They need to click on each subinterface to see which physical interface it belong to.

 

Solution

once you put a sub-interface in vsys on the public system will appear like this

but, if you choose "test" is the name of the vsys ,will appear like this :



this is a normal behavior

if you are in public, everything look ok, if you are in vsys, is normal to appear there 2 sub-interfaces under 1 interface