No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Knowledge Base

Peru-- Huawei Peru-- Enterprise Network-- AR161F --- Mensaje "The user level is too low"

Publication Date:  2019-07-22  |   Views:  594  |   Downloads:  0  |   Author:  g84089401  |   Document ID:  EKB1001549093


Issue Description

Customer can not input the command "user-interface vty" the message "The user level is too low" appears.

Alarm Information

" The user level is too low "

Handling Process

1.- Confirm the user level of the customer.


Root Cause

The customer assign a user level of 3 and the command "user-interface vty" need a user level 15.



Change the user level to lv 15


Sometimes user get confused whit the product documentation explanation, Other explanation to the user levels can be the following:


User level 0
- The commands in this level are diagnostic commands such as ping and tracert commands that are used to access a remote device, such as Telnet clients.
- Supports command level 0. 



User level 1
- The commands in this level are system maintenance commands, such as display commands.
NOTE: Some display commands are not in this level. For example, the commands display-current-configuration and display saved-configuration are at level 3
- Supports command level 0 and 1.



User level 2
- The commands in this level are the service configuration commands.
- Supports command level 0, 1 and 2.



User level 3 - 15
- Commands at this level are basic system operation commands that support services, including the file system, FTP, TFTP, user administration commands, command-level configuration commands, and debug commands.
- These users can be customized by the user.
- Supports command levels 0, 1, 2 and 3.
- Note: the "user-interface" command is reserved only for use by Users level 15.


How to see the command level on the product documentation:


Command level 0




Command level 1



Command level 2


Command level 3


Command level 3 that can be input only by a user level 15.