We are deploying a new Hotel in FTTH technology, and today we are configure OLT MA5603T and this OLT can’t accept the command:
ont wan-profile profile-id 1 profile-name "ftth_WAN"
View the cli error:
LT(config)#ont wan-profile ^
% Unknown command, the error locates at '^'
Other deployments we can use the same Chassi and versions, can accept this command.
These is a criticial problema because the configuration of ONTs needs this WAN-profile.
Command : display version
PATCH : SPC101 HP1009
[Solution] : To could use the command “ont wan-profile” you need to have one of this 3 situation:
1. use main board such as MCUD/SCUH/SCUL
2. switch the workscene for SCUN to OLT
3. upgrade the software version of SCUN to higher version such as R017C10 or the newes