No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Knowledge Base

Limit mac source address via OLT connected to the ONT

Publication Date:  2018-10-18  |   Views:  1244  |   Downloads:  0  |   Author:  t84102067  |   Document ID:  EKB1001929302


Issue Description

We have a problem with ONTs working in bridge mode. If a customer connect differents cpes behind an ONT working in bridge mode, all the cpe will receive a wan ip address with no limit. Is there a feature on the OLT to limit cpes than the customer can connect behind the ont ? Maybe limit mac source address connected to the ont. We are using this model of OLT : MA5603T


We can set it by “mac-address max-mac-count” commands based on service-port or gem port of the ONT as follow:


mac-address max-mac-count service-port // index count

mac-address max-mac-count gpon  // frameid/slotid/portid ont ontid gemport gemindex [user-vlan [untagged| user-vlanid]|user-8021p user-8021p [user-vlan user-vlanid]|user-encap user-encap]count