No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-Does Only the Log Host of the Information Center Need to Be Specified for Sending Logs?

Publication Date:  2019-01-18 Views:  170 Downloads:  0

Issue Description

Does only the log host of the information center need to be specified for sending logs?

Handling Process

l To send syslogs, you only need to specify the log host by running the info-center loghost x.x.x.x command and use the default values of other parameters.
l To send binary logs, perform the following operations:
1. Run the system-view command to access the system view.
2. Run the firewall session log-type binary host host-id ip-address port command to configure the IP address of a binary log host and receiving port.
Currently, the system supports only receiving port 9002.
3. Run the firewall interzone zone-name1 zone-name2 command to enter the interzone view.
4. Run the session log enable acl-number acl-number { inbound | outbound } command to enable the output of binary logs matching interzone ACL rules.

END