An LSI SAS2308 RAID controller card and an LSI SAS3108 RAID
controller card are installed on a G2500 server. During the restart process,
only the self-check information of the LSI SAS2308 is displayed whereas the
self-check information of the LSI SAS3108 is not displayed. The WebBIOS page of
the LSI SAS3108 RAID controller card cannot be accessed.
Only one OpROM (either LSI SAS2308 or LSI SAS3108) can be loaded
to the system at the same time, and the LSI SAS2308 OpROM is loaded by default.
You can load the LSI SAS3108 OpROM on the system setup screen.
1. Power on the server and enter the
setup screen. Choose Advanced > PCH SATA Configuration > Select
2. Select Load 3108 Raid Oprom and press F10 to save the settings exit.
3. You can use the same method switch
back to the LSI SAS2308 OpROM.