No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Reconfigure RAID Arrays in Batches for X6800 Servers by Using the uMate Tool

Publication Date:  2019-04-10 Views:  111 Downloads:  0

Issue Description

The RAID 1 arrays of a batch of X6800 servers (320 server nodes) need to be reconfigured according to the customer's demand. The uMate tool is used. After all configuration operations are complete, the software shows that the configuration is successful. However, the RAID arrays are not reconfigured on the servers. The problem persists in a second attempt.

Handling Process

Set the following parameter in the configuration template:

<ForceCfg>Enabled</ForceCfg>

After the operation is performed again, the original RAID 1 arrays are deleted and new RAID 1 arrays are configured.

Root Cause

The following parameter in the configuration template needs to be configured:

<ForceCfg>Enabled</ForceCfg>

 

END