No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

No Image Is Displayed on the RP200 Screens

Publication Date:  2019-04-12 Views:  10 Downloads:  0
Issue Description

No image is displayed on either screen of the RP200, as shown in the following figure.

Alarm Information
NONE
Handling Process

1. According to feedback from field engineers, the screen display was normal earlier and the configuration was not modified. Remove and re-insert the HDMI cable between the screen and the terminal host, and set the PC mode to HDMI, by following instructions in the error message. The fault persists.


2. Press TOOLS on the remote control. Input sources are displayed on the screen. Press ENTER and select HDMI1 as the input source. The screen display then becomes normal.

END