eSight Network is deployed at a site. After NE40E is added to eSight and BGP MPLS VPN service discovery is performed, eSight cannot discover services.
Perform the following operations:
1. Verify that SNMP parameters are correct on eSight.
2. Verify that eSight is adapted to NE40E.
3. Verify that the license item for the BGP MPLS VPN service is available on eSight.
4. Prolong the timeout interval of the SNMP protocol.
After the preceding steps are performed, services still cannot be discovered. The collected information shows that:
Duplicate data exists on the device (peer neighbors learned by DCN-Serial6/0/22:0 and DCN-Serial1/0/0:0 are both 184.108.40.206). eSight considers that the discovered VPN data is abnormal and discards the data.
The two neighbors in the following figure belong to the OSPF.
Process 65534 with Router ID 220.127.116.11
The DCN function is enabled on the NE by default. After the DCN function is disabled on NE40E, the problem is solved.Disable the DCN globally.