No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

How Can I Use an AR Router as an AC to Manage APs Through a Layer 3 Interface? (V200R009)

Publication Date:  2019-07-17 Views:  116 Downloads:  0

Issue Description

How can I use an AR router as an AC to manage APs through a Layer 3 interface? (V200R009)

Networking Requirements

In Figure 1, an AC directly connects to an AP through a Layer 3 Ethernet interface. WLAN basic services need to be deployed to implement mobile office.


Specific requirements are described below:

 A wireless network named HUAWEI is provided.

 The AP obtains an IP address in 10.10.10.1/24.

 IP addresses in 10.10.11.0/24 are assigned to employees.

Figure 1 Configuring basic WLAN services on a small-scale network (an AC manages APs through Layer 3 interfaces)

Handling Process

The key configuration is as follows:

1. Configuration on the AC

#                                                                              

vlan batch 101                                                                                      

#                                                                              

dhcp enable                                

#                                                                                                                                                                                                                

interface GigabitEthernet0/0/1                                               

 ip address 10.10.10.1 255.255.255.0            

 dhcp select interface                                      

#                                                                              

interface GigabitEthernet0/0/1.1                                                

 dot1q termination vid 101                                                    

 ip address 10.10.11.1 255.255.255.0         

 dhcp select interface                                            

#                                                                               

interface LoopBack0                                                           

 ip address 1.1.1.1 255.255.255.255                                                                                                

#                                                                               

capwap source interface loopback0             

#

wlan ac                        

 security-profile name default

  security wpa-wpa2 psk pass-phrase huawei@123 aes-tkip

 ssid-profile name default

  ssid HUAWEI

 vap-profile name default1

  forward-mode tunnel

  service-vlan vlan-id 101

rrm-profile name default

 radio-2g-profile name default

 radio-5g-profile name default

ap auth-mode no-auth

 ap-group name default

 ap-id 0 type-id 75 ap-mac ac75-1dc9-XXXX ap-sn 21500831023GJA00XXXX

  radio 0

   vap-profile default1 wlan 1

  radio 1

   vap-profile default1 wlan 1

  radio 2

   vap-profile default1 wlan 1

#                       

return

END