NE40E-X3 V600R008C10SPC300 V600R008SPH033
Why are there two ESNs, one for the chassis and the other for the main control
ESN of master:210305420610HB000056
ESN of slave:2102355250P0HB000010
< QHXN-OUT-CRT-HWNE40-2>DIS license ESN
Description=NetEngine40E-X3,CR5Z2BKPG,NE40E-X3 Integrated AC Chassis
Components, (Including Dual AC Power)
/$[Board Integration Version]
Description=NetEngine40E,CR52MPUD2,Main Processing Unit D2(Including 2G Memory
and 2G USB)
a license is loaded to the NE40E-X3, the main control board checks the ESN of
the chassis and the ESN in the applied .dat file. If the two ESNs do not match, the device compares the ESN of the
main control board and the ESN in the .dat file. As a result, the BarCode of the chassis and the BarCode of the
main control board are displayed in the display esn command output.
The license loaded to the NE40E-X3 is in the Trial state.
the ESN in the current license file does not match the BarCode of the chassis.
address the problem, load a correct license.
is confirmed that the problem is caused by an inconsistency between the ESN of
the chassis and the ESN in the applied .dat file.