There are multiple network segments on the AR1200S. How do I configure these network segments to use different fixed public IP addresses to access the Internet?
There are two internal network segments: 192.168.1.0/24 and 172.16.1.0/24, which need to use the fixed public IP address 220.127.116.11 and 18.104.22.168, respectively, to access the Internet.
acl number 3331 (Create an ACL to match the internal network segment 172.16.1.0/24.)
rule 5 permit ip source 172.16.1.0 0.0.0.255
acl number 3333 (Create an ACL to match the internal network segment 192.168.1.0/24.)
rule 5 permit ip source 192.168.1.0 0.0.0.255
nat address-group 3 22.214.171.124 126.96.36.199
nat address-group 7 188.8.131.52 184.108.40.206
ip address 220.127.116.11 255.255.255.0
ip address 18.104.22.168 255.255.255.0
nat outbound 3333 address-group 3 (Configure a fixed internal network segment to use a fixed public IP address to access the Internet.)
nat outbound 3331 address-group 7
nat outbound 3335 (Configure other internal network segments to use the IP address of the local interface to access the Internet.)