The customer forgets the login IP address and password of the IPC6212 bullet camera and asks how to restore the dome camera to its factory settings. This case describes how to restore the camera to its factory settings by pressing the RESET button.
1. Remove the sun shield from the IPC6212 bullet camera, and then loosen the front cover.
2. Find the RESET button. Press and hold the RESET button before the camera is powered on, and then power on the camera. After 10 seconds, the camera is restored to its factory settings. The default IP address of the restored camera is 192.168.0.120, the default login user name is Admin and the password is HuaWei123.
The following figure shows the RESET button.