No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FAQ-How to Delete the Interface Information of a Board that Has Been Removed from an NE5000E from the Configuration File?

Publication Date:  2019-04-22 Views:  86 Downloads:  0

Issue Description

A board is inserted into an incorrect slot on an NE5000E and therefore is removed. The configuration file, however, still contains the interface information of the removed board.

*interface GigabitEthernet1/0/1        

*undo shutdown


NE5000Es reserve interface configurations in consideration of automatically restoring configurations after the involved board is removed from an NE5000E. If such interface information is not needed, run the following commands to delete it.

After the board or chassis is removed, the offline configurations of the board or chassis need to be deleted to reclaim some resources. You can use commands to delete configurations of a chassis that is not registered or a board that is not positioned.

# Delete the configurations of the board which is not in slot 1.

<HUAWEI> system-view

[~HUAWEI] clear inactive-configuration slot 1

Warning: The inactive configuration of slot 1 will be cleared and can't be restored.

Are you sure to continue?[Y/N] y

The command will take a few minutes, please wait..

Info: Succeeding in clearing the inactive configuration.