The RH2288V3 server is installed in pxe mode. During the power-on self-test, press F12. After the BIOS password is entered, a black screen is displayed. Only one cursor is blinking, and the installation fails.
1. During the startup process, press F11 to start the system from the NIC. The fault persists.
2. During the power-on self-test, press Delete to enter the BIOS. Check the configuration of the pxe.
a. advanced---All options in PXE configuration are enabled.
b. boot---Boot type is legacy.
c. boot---If pxe boot capability is disabled, change the value to legacy, save the setting, and then restart the pxe.
The pxe boot mode in the BIOS is incorrect. As a result, the PXE boot fails.
If the value of boot---pxe boot capability is disabled, change the value to legacy, save the setting, and then restart the pxe.