How do I set site name parameters, such as the display position and color, for the VP96X0 on the SMC?
Log in to the MCU CLI through SSH, and run the system-view conf-policy site-name-config command to set the site name parameters, as shown in the following figure:
(1) This setting is supported only in V5R2 and later versions, and not supported in V2R1.
(2) Site-namesource // Site name type
site-namelen // Site name length
Displayposition // Site name position: D-C, lower center; D-L, lower left; D-R, lower right; U-C, upper center; U-L, upper left; U-R, upper right
Site-name-Color(R) // Site name color - R
Site-name-Color(G) // Site name color - G
Site-name-Color(B) // Site name color - B
Background-transparency // Background transparency