No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Knowledge Base

FAQ-How Do I Compare Priorities of Traffic Classifiers Associated with Traffic Behaviors on S Series Switches

Publication Date:  2019-05-15  |   Views:  179  |   Downloads:  0  |   Document ID:  EKB1100015268

Contents

Issue Description

How to compare priorities of multiple traffic behaviors and traffic classifiers in a traffic policy?

Solution

The method of comparing the values of precedence is as follows:

traffic classifier a  precedence X

traffic classifier b  precedence Y

traffic classifier c  precedence Z

The precedence value ranges from 0 to 65535. The smaller the value, the higher the priority.



If precedence-value is not specified, the system allocates a priority to the traffic classifier. The allocated priority value is [(max-precedence + 5)/5] * 5, where max-precedence specifies the maximum priority of a traffic classifier.

If no traffic classifier exists in the system, the value of max-precedence is 0.

For example: 

traffic classifier a precedence X //X Priority [(0+5) /5]*5=5

traffic classifier b precedence Y //Y priority [(5+5) /5]*5=10

traffic classifier c precedence Z //Z Priority [(10+5) /5]*5=15

Note: The priority between the first binding and the second binding is increased by a multiple of 5.