Publication Date: 2019-07-11 | Views: 533 | Downloads: 0 | Author: a84085035 | Document ID: EKB1100021698
When
we enable the software loopback (in-loop or out-loop) on Ethernet, 5 minutes
after that the loopback released. This may inconvenience the customer to
perform test more than 5 minutes
No alarm information on this case
1.
On the NMS, go to NE Batch Configuration > Automatic
Disabling of NE Function
2. Find the NE and click the arrow →
3. Find the Ethernet Loopback
4. change Auto
Disabling from Enabled to Disabled.