The M22 error occurs on the VPC600 camera, but
the camera works properly.
whether the alarm indicator is steady red.
If the red
indicator does not blink red, it is suspected that the PTZ is moved or rotated
in the vertical direction. After stopping removing or blocking, the red indicator does not
blink, but the error will be saved until it is powered off.
off and then power on the device. The problem is solved.
the working process, the PTZ is blocked when it is moved or rotated. After stopping
removing or blocking, the error will be saved until it is powered off.
off the camera and restart the camera.
rectify the fault, perform the following steps:
whether the red indicator blinks. If not, power off and then power on the
device. Then, check whether the fault is rectified.
the red indicator keeps blinking, check whether the original power adapter or
power adapter has been reconstructed. If the power adapter is not the original
one, replace the original power adapter.
the problem persists after the original power adapter is replaced, restart the
device and check whether the fault is rectified.
the preceding methods are invalid, replace the spare parts.