During the test, a county company cannot join the conference (the GK registration is normal). When initiating a call, a message is displayed on the SMC2.0, indicating that the network segment bandwidth is restricted.
The version information is as follows:
- SMC2.0: V100R003C10SPCc00
- MCU: V200R001C30SPCb00
- TE50: V500R002C00SPC200
Networking description: Set up a platform in the provincial center, including one SMC2.0 and two MCU9660s. Conference terminals in cities and counties are connected to the platform through the data network. Two MCUs form a resource pool.
1. Check the SC policy. It is found that the ‘Restrict total bandwidth’ is not enabled.
2. The conference terminals at other sites can join the conference. Therefore, the configuration of this site may be incorrect. Log in to the terminal of the site and check the configuration. It is found that the WI-FI client is enabled on the terminal and Wi-Fi network preferred is set to Enable in the conference parameters.
Disable the WI-FI client on the terminal which fails to join the conference and disable the WI-FI network first. Then call the site again. The site joins the conference successfully.