When the service IP address is being changed on the standalone SC, an error is reported saying "err: business no authority in current state".
1. The SC works in active/standby mode. The service IP address can be changed only after the active/standby is disabled. Run the system-view hot-standby disable command to disable the active/standby mode.
2. After the active/standby mode is disabled, change the service IP address and reboot the SC for the change to take effect.
3. Enable the active/standby mode again.
It is not allowed to change the IP address of an SC that works in active/standby mode. The IP address can be changed only after the active/standby mode is disabled for the SC.