How to configur N/A e an ME60 V600R002C02SPC700 to translate destination addresses to different addresses through NAT?
For example, if you want to translate the destination address of packets from user group 1 to 220.127.116.11 when the packets are destined for network A and translate the destination address of packets from user group 1 to 18.104.22.168 when the packets are destined for other networks, configure as follows:
rule 5 permit ip destination x.x.x.x //(IP address of network A)
rule 5 permit ip source any
nat instance 1
add slot 3 master-------------------------//Only one NAT instance can be bound to a NAT service board.
nat address-group 1 22.214.171.124
nat address-group 2 126.96.36.199
nat outbound 3001 adress-group 1 // The destination address of packets matching ACL 3001 is translated to the address in nat address-group 1.
nat outbound 3002 adress-group 2 // The destination address of packets matching ACL 3002 is translated to the address in nat address-group 2.
rule permit ip source user-group group1
traffic classifier c1
if-match acl 6001
traffic behavior b1
nat bind instance 1
traffic policy p1
classifier c1 behavior b1
traffic-policy p1 inbound