Step 1 On the command line interface (CLI), run the vtl stop command to stop the VTL service.
Step 2 On the CLI, run the vtl setup command.
This command can disable the VTL3500 and the fiber channel.
Step 3 On the CLI, run the vtl start command to start the VTL service.
Step 4 Start the VTL console, fiber channel, and then the VTL3500. The tape is displayed in the virtual
Step 5 Move the virtual tape manually to the required tape library.
Step 6 If the problem persists, contact Huawei Symantec technical support engineers.
The system hardware is faulty.
To locate and troubleshoot the fault, do as follows: