No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>


To have a better experience, please upgrade your IE browser.


How to remote Telnet manage after Firewall Set for transparent mode

Publication Date:  2012-11-24 Views:  540 Downloads:  0
Issue Description
Firewall set for transparent mode, there is no three layer routing, how to carry on the remote Telnet management (as long as remote routing this IP address can reach to manage the equipment).
Alarm Information
Handling Process
USG5300 can’t configure system IP after set to transparent mode, in order to realize the remote equipment TELNET management, can use the following methods:
L3 - - - - - - USG5300 (transparent mode) - - - - - - L3, can configure Sub address in L3 to solve. For example:
Configure Sub IP( sub)in the port which connects L3 with USG5300, configure a VLAN in USG5300, such as VLAN100, this VLAN contains USG5300 and L3 connected the two port, and configure virtual three layer Vlanif 100IP address ( Interface VLAN 100, this IP address routing can reach in the whole network, can realize remote manage USG5300.
Root Cause