No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>


To have a better experience, please upgrade your IE browser.


Announcement Indicating the Incorrect Dialed Number Played If a User Dials a Digit After the Trunk Bearer of the Call Source Is Configured on the SoftCo

Publication Date:  2015-04-17 Views:  355 Downloads:  0
Issue Description
Figure 1-1 shows the network.

Figure 1-1 SoftCo5816 outgoing call network

After dialing a digit, a user hears an announcement indicating that the dialed number is incorrect.
Handling Process
Step 1 Run the show tgld command to check whether the trunk bearer of the call source is enabled.

If the trunk bearer has been enabled, go to Step2. If the trunk bearer has not been enabled, go to Step3.

Step 2 Verify that the minimum number length of the outgoing prefix is equal to or greater than 2.

Step 3 If the fault persists, contact Huawei technical support engineers.

Root Cause
The possible cause is that the prefix configuration is incorrect.