Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
2-Pin DC Power Cable (Phoenix Connector)
Appearance and Structure
Figure 9-29 shows the appearance and structure of the 2-pin DC power cable and the Phoenix connector.
Specifications
Table 9-16 lists the specifications of the 2-pin DC power cable.
Connection
One end of the 2-pin DC power cable is used with the Phoenix connector and connected to the DC input port of the S5720I-SI. The other end needs to be made onsite. You can make the power cables according to site requirements and connect the cables to the DC power supply system.