Rate and give feedback:
Huawei ha traducido este documento a diferentes idiomas combinando la traducción automática con la revisión humana a fin de permitirle entender mejor su contenido.
Nota: Sin importar lo avanzada que sea, la traducción automática no puede igualar la calidad que proporcionan los traductores profesionales.
Huawei no asume ninguna responsabilidad por la precisión de las traducciones y recomienda consultar el documento escrito en inglés (al cual puede acceder mediante el enlace proporcionado).
SFP-10G-ZDWT
Table 10-92 SFP-10G-ZDWT specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | SFP-10G-ZDWT |
| Part Number | 02310YUT |
| Model | SFP-10G-ZDWT |
| Form factor | SFP+ |
| Application standard | 10GBASE-DWDM |
| Connector type | LC |
| Optical fiber type | SMF |
| Working case temperature [°C(°F)] | 0°C to 70°C (32°F to 158°F) |
| Transmission rate [bit/s] | 10 Gbit/s |
| Target transmission distance [km] | Single-mode fiber: 60 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1529.16 nm - 1560.61 nm |
| Maximum Tx optical power [dBm] | 3 dBm |
| Minimum Tx optical power [dBm] | -1 dBm |
| Minimum extinction ratio [dB] | 8.2 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity [dBm] | -24 dBm |
| Overload power [dBm] | -1 dBm |
NOTE:
The startup of the optical module takes a long time. Therefore, when the optical module is just installed into a switch port, the switch may incorrectly report an alarm indicating that the transmit optical power is low. |
|
This module can only be used on a switch running V200R009C00 or a later version. A switch running an earlier version may fail to obtain information about this module.