Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SFP-GE-BX40-D-I
Table 10-28 SFP-GE-BX40-D-I specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | SFP-GE-BX40-D-I |
| Part Number | 02312TMC |
| Model | SFP-GE-BX40-D-I |
| Form factor | SFP |
| Application standard | 1000BASE-BX |
| Connector type | LC |
| Optical fiber type | SMF |
| Working case temperature [°C(°F)] | -40°C to +85°C (-40°F to +185°F) |
| Transmission rate [bit/s] | 1 Gbit/s |
| Target transmission distance [km] | Single-mode fiber: 40 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1310 nm (RX) 1490 nm (TX) |
| Maximum Tx optical power [dBm] | 6.5 dBm |
| Minimum Tx optical power [dBm] | 1.5 dBm |
| Minimum extinction ratio [dB] | 8.2 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity [dBm] | -26 dBm |
| Overload power [dBm] | -7 dBm |
NOTE:
Supports the single-fiber bidirectional function. Single-fiber bidirectional (BIDI) optical modules must be used in pairs. For example, SFP-GE-BX40-D-I must be used with SFP-GE-BX40-U-I. |
|
This module can only be used on a switch running V200R019C00 or a later version.