Version Mapping
Table 4-31 lists the mapping between the S5700-52P-LI-AC chassis and software versions.
Table 4-31 Version mappingSeries
|
Model
|
Software Version
|
|---|
S5700-LI
|
S5700-52P-LI-AC
|
V200R001C00 to V200R012C00 versions
NOTE: This model does not
match V200R001C01, V200R003C02, V200R003C10, V200R005C00SPC500, V200R005C01,
V200R005C02, V200R005C03, or V200R007C10.
|
Appearance and Structure
Figure 4-13 S5700-52P-LI-AC appearance![]()
1
|
Forty-eight 10/100/1000BASE-T ports
|
2
|
Four 1000BASE-X ports
Applicable
modules and cables:
|
3
|
One mini USB port
|
4
|
One console port
|
5
|
Ground screw
|
6
|
RPS socket
NOTE: It is used with an RPS cable, which is not hot swappable.
|
7
|
Jack for AC power cable locking strap
NOTE: The AC power cable locking strap is not delivered
with the switch.
|
8
|
AC socket
|
Port Description
10/100/1000BASE-T port
A 10/100/1000BASE-T
Ethernet electrical port sends and receives service data at 10/100/1000
Mbit/s, and must use an
Ethernet cable.
Table 4-32 describes the attributes
of a 10/100/1000BASE-T Ethernet electrical port.
Table 4-32 Attributes of a 10/100/1000BASE-T Ethernet electrical port
Attribute
|
Description
|
Connector type
|
RJ45
|
Standards compliance
|
IEEE802.3, IEEE802.3u, IEEE802.3ab
|
Working mode
|
10/100/1000 Mbit/s auto-sensing
|
Maximum transmission distance
|
100 m
|
1000BASE-X port
When
a 1000BASE-X port uses a GE optical module, it can only transmit and
receive data at 1000 Mbit/s and does not support the 100 Mbit/s transmission
speed. When a 1000BASE-X port uses a GE copper module, it can transmit
and receive data at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
Table 4-33 describes the attributes of a
1000BASE-X Ethernet optical port.
Table 4-33 Attributes of a 1000BASE-X Ethernet optical port
Attribute
|
Description
|
Connector type
|
LC/PC
|
Optical port attributes
|
Depend on the module used
|
Standards compliance
|
IEEE802.3z
|
Console port
The console port is connected
to a console for on-site configuration. The port must use a
console cable. The console port is
used when a switch is powered on for the first time. For details about
the attributes of a console port, see
Table 4-34.
Table 4-34 Attributes of a console port
Attribute
|
Description
|
Connector type
|
RJ45
|
Standards compliance
|
RS-232
|
Working mode
|
Duplex Universal Asynchronous Receiver/Transmitter (UART)
|
Baud rate
|
9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200
bit/s
Default value: 9600 bit/s
|
Mini USB port
The mini USB port is connected
to a console for on-site configuration. When both the Mini USB and
console port have a cable connected, only the Mini USB port works.
Indicator Description
The S5700-52P-LI-AC has similar indicators to those on the S5700-28X-LI-AC, except that the S5700-52P-LI-AC does not have an RPS indicator. For details, see Indicator Description.
Power Supply Configuration
The S5700-52P-LI-AC has a built-in power module and does not support pluggable power modules. It can connect to an RPS1800 power supply for power redundancy.
Figure 4-14 shows the power supply mode of a built-in AC power module. The built-in AC power module (PWR) receives power from an external power source and provides a 12 V output to the chassis.
Figure 4-14 Power supply mode of a built-in AC power module![]()
L: live wire
|
N: neutral wire
|
PGND: protection ground wire
|
GND: 12 V reference ground
|
Heat Dissipation
The S5700-52P-LI-AC has a built-in fan for forced air cooling. The airflow direction is left-to-right.
![]( "Click to enlarge")
![]()
This figure only shows the airflow direction and does not depict the actual device.
Technical Specifications
Table 4-35 lists technical specifications of the S5700-52P-LI-AC.
Table 4-35 Technical specificationsItem
|
Description
|
|---|
Memory (RAM)
|
256 MB
|
Flash
|
- V200R001: 64 MB
- V200R002 and later versions: 200 MB
|
Mean time between failures (MTBF)
|
39.26 years
|
Mean time to repair (MTTR)
|
2 hours
|
Availability
|
> 0.99999
|
Service port surge protection
|
Common mode: ±6 kV
|
Power supply surge protection
|
±6 kV in differential mode, ±6 kV in common mode
|
Dimensions (H x W x D)
|
43.6 mm x 442.0 mm x 310.0 mm (1.72 in. x 17.4 in. x 12.2 in.)
|
Weight (with packaging)
|
3.5 kg (7.72 lb)
|
Stack ports
|
- V200R010 and earlier versions: the last two uplink 1000BASE-X optical ports
- V200R011 and later versions: four uplink 1000BASE-X optical ports
|
RTC
|
Supported
|
RPS
|
Supported
|
PoE
|
Not supported
|
Rated voltage range
|
100 V AC to 240 V AC, 50/60 Hz
|
Maximum voltage range
|
90 V AC to 264 V AC, 47 Hz to 63 Hz
|
Maximum power consumption (100% throughput, full speed of fans)
|
48.4 W
|
Typical power consumption (30% of traffic load) - Tested according to ATIS standard
- EEE enabled
- No PoE power consumption
|
32.5 W
|
Operating temperature
|
0°C to 50°C (32°F to 122°F) at an altitude of 0-1800 m (0-5906 ft.) NOTE: When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
|
Storage temperature
|
-40°C to +70°C (-40°F to +158°F)
|
Noise under normal temperature (27°C, sound power)
|
< 43.8 dB(A)
|
Relative humidity
|
5% to 95%, noncondensing
|
Operating altitude
|
0-5000 m (0-16404 ft.)
|
Certification
|
- EMC certification
- Safety certification
- Manufacturing certification
|
Part number
|
02353174
|
