Example for Configuring the STelnet Service to Enable Switch Management on the CLI
Networking Requirements
Configuration Roadmap
The configuration roadmap is as follows:
- Load the license file.
The S1720GW-E, S1720GWR-E, and S1720X-E have licenses installed before delivery. For details about how to obtain licenses for the S1720GW, S1720GWR, and S1720X, see S Series Switch License Use Guide.
- Enable the STelnet service.
- Create an SSH user.
Procedure
- Load the license file.
- Choose . The license management page is displayed, as shown in Figure 8-2.
- You can manually load a license file from your local
computer or the server.
- Load a license file from your local computer
Click
next to Select file and select the license file to be uploaded. Click Activate to restart the switch and activate the license file.
- Load a license file from the server
Enter the server IP address in the Server IP address text box, and click Activate to restart the switch and activate the license file.
The switch will restart after you confirm license activation, so it is recommended that you select Save the configuration and Reboot.
- Load a license file from your local computer
- Enable the STelnet service.
- Set the STelnet function to ON, as shown in Figure 8-3.
- Create an SSH user.
- Click Create. The page for creating
an administrator account is displayed. Set the administrator information. Figure 8-4 shows the configuration result.
- User name: admin
- Password: admin123
- Confirm password: admin123
- Access level: Management user
- Access type: SSH
- Click Create. The page for creating
an administrator account is displayed. Set the administrator information. Figure 8-4 shows the configuration result.
next to 
Verification
Click Open. In the displayed page, enter the user name and password and press Enter. (The following information is for reference only.)
login as: admin
SSH server: User Authentication
Using keyboard-interactive authentication
Password:
Info: The max number of VTY users is 8, and the number
of current VTY users on line is 5.
The current login time is 2012-08-06 09:35:28+00:00.
<huawei>
