Nessuna risorsa pertinente trovata nella lingua selezionata.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S7700 and S9700 V200R011C10

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei utilizza la traduzione automatica insieme alla revisione umana per tradurre questo documento in diverse lingue, per facilitare la comprensione del contenuto di questo documento. Nota: la traduzione automatica, anche la più avanzata, non può corrispondere alla qualità dei trasduttori professionisti. Huawei non accetta alcuna responsabilità per l'accuratezza della traduzione e raccomanda di fare riferimento al documento inglese (per il quale è stato fornito un collegamento).
Summary of CFM Configuration Tasks

Summary of CFM Configuration Tasks

After basic CFM functions are configured, CFM can work properly. To deploy special CFM functions such as loopback, linktrace, adjusting CFM parameters, and CFM association, perform the configurations according to the following sections.

Table 9-8 describes the CFM configuration tasks.

Table 9-8  CFM configuration tasks

Scenario

Description

Task

Configure basic CFM functions

CFM detects connectivity faults on an end-to-end link.

Configuring Basic Ethernet CFM Functions

Configure loopback

Similar to IP ping, loopback monitors connectivity of a path between a MEP and an RMEP.

Configuring Loopback

Configure linktrace

Linktrace sends test packets and waits for a response to check whether the destination device is reachable.

Configuring Linktrace

Set CFM parameters

By adjusting Ethernet CFM parameters, you can better implement end-to-end connectivity fault detection on the Ethernet.

Setting CFM Parameters

Configure CFM association

CFM can be associated with interfaces and detection protocols to quickly report link faults, ensuring service reliability.

Configuring CFM Association

Traduzione
Download
Updated: 2019-09-23

N. documento: EDOC1000178318

Visualizzazioni:123844

Download: 81

Average rating:
This Document Applies to these Products
Documenti correlati
Related Version
Share
Precedente Avanti