Nessuna risorsa pertinente trovata nella lingua selezionata.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S7700 and S9700 V200R011C10

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei utilizza la traduzione automatica insieme alla revisione umana per tradurre questo documento in diverse lingue, per facilitare la comprensione del contenuto di questo documento. Nota: la traduzione automatica, anche la più avanzata, non può corrispondere alla qualità dei trasduttori professionisti. Huawei non accetta alcuna responsabilità per l'accuratezza della traduzione e raccomanda di fare riferimento al documento inglese (per il quale è stato fornito un collegamento).
Verifying the BFD Configuration

Verifying the BFD Configuration

Procedure

  • Run the display bfd configuration { all | static [ name bfd-name ] | discriminator local-discr-value | dynamic | peer-ip ip-address [ vpn-instance vpn-instance-name ] } [ verbose ] command to view the BFD configurations.
  • Run the display bfd configuration { all | static | peer-ipv6 ipv6-address [ vpn-instance vpn-instance-name ] } [ verbose ] command to view the BFD6 configurations.
  • Run the display bfd interface [ interface-type interface-number ] command to verify the BFD-enabled interface.
  • Run the display bfd session { all | static | discriminator discr-value | dynamic | peer-ip { default-ip | ip-address [ vpn-instance vpn-instance-name ] } | static-auto } [ verbose ] command to view information about the BFD session.
  • Run the display bfd session { all | static | peer-ipv6 ipv6-address [ vpn-instance vpn-instance-name ] } [ verbose ] command to view information about the BFD6 session.
  • Run the display bfd statistics command to view global BFD statistics.
  • Run the display bfd statistics session { all | static | dynamic | discriminator discr-value | peer-ip default-ip | peer-ip ip-address [ vpn-instance vpn-name ] | static-auto } command to view BFD session statistics.
  • Run the display bfd statistics session { all | static | peer-ipv6 ipv6-address [ vpn-instance vpn-instance-name ] } command to view BFD6 session statistics.
Traduzione
Download
Updated: 2019-10-18

N. documento: EDOC1000178318

Visualizzazioni:124612

Download: 81

Average rating:
This Document Applies to these Products
Documenti correlati
Related Version
Share
Precedente Avanti