Nessuna risorsa pertinente trovata nella lingua selezionata.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S7700 and S9700 V200R011C10

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei utilizza la traduzione automatica insieme alla revisione umana per tradurre questo documento in diverse lingue, per facilitare la comprensione del contenuto di questo documento. Nota: la traduzione automatica, anche la più avanzata, non può corrispondere alla qualità dei trasduttori professionisti. Huawei non accetta alcuna responsabilità per l'accuratezza della traduzione e raccomanda di fare riferimento al documento inglese (per il quale è stato fornito un collegamento).
Overview of Reliability

Overview of Reliability

Huawei switches provide various reliability technologies.

As networks rapidly develop and applications become more diversified, various value-added services such as Internet Protocol television (IPTV) and video conferencing have become increasingly more widespread. However, network disconnections may affect many services and cause losses. As a result, demands for network infrastructure reliability are rising.

In real-world applications, many network failures and service interruptions are caused by non-technical factors. An effective way to enhance system reliability is to improve fault tolerance capabilities of the system, speed up fault recovery, and reduce the impact of faults on services.

Traduzione
Download
Updated: 2019-09-23

N. documento: EDOC1000178318

Visualizzazioni:124235

Download: 81

Average rating:
This Document Applies to these Products
Documenti correlati
Related Version
Share
Precedente Avanti