所选语种没有对应资源,请选择:

本站点使用Cookies,继续浏览表示您同意我们使用Cookies。Cookies和隐私政策>

提示

尊敬的用户,您的IE浏览器版本过低,为获取更好的浏览体验,请升级您的IE浏览器。

升级

华为V2&V3服务器 RAID 控制卡 用户指南 36

本文档介绍RAID控制扣卡LSI SAS2208、LSI SAS2308、LSI SAS3008、LSI SAS3108、LSI SoftRAID、PM8060、PM8068的外观及特性、如何配置RAID、如何安装驱动软件等信息。
评分并提供意见反馈 :
华为采用机器翻译与人工审校相结合的方式将此文档翻译成不同语言,希望能帮助您更容易理解此文档的内容。 请注意:即使是最好的机器翻译,其准确度也不及专业翻译人员的水平。 华为对于翻译的准确性不承担任何责任,并建议您参考英文文档(已提供链接)。
常用命令

常用命令

查看所有控制器

命令功能

查看所有控制器。

命令格式

sas2ircu list

参数说明

使用指南

使用实例

# 查看所有控制器

domino:~# ./sas2ircu list
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

        Adapter       Vendor  Device                      SubSys  SubSys 
Index    Type           ID      ID    Pci Address         Ven ID  Dev ID 
 -----  ------------  ------  ------  -----------------   ------  ------ 
  0     SAS2308        1000h   97h    00h:01h:00h:00h     1000h   3090h 
SAS2IRCU: Utility Completed Successfully.     

查看所有信息

命令功能

查看RAID、虚拟磁盘、物理硬盘的详细信息。

命令格式

sas2ircu controller_id display

参数说明

参数

参数说明

取值

controller_id

RAID卡的ID

使用指南

使用实例

# 查看RAID、虚拟磁盘、物理硬盘的详细信息。

domino:~# ./sas2ircu 0 display
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

Read configuration has been initiated for controller 0 
---------------------------------------------------------------------- 
Controller information 
---------------------------------------------------------------------- 
  Controller type                        : SAS2308 
  BIOS version                           : 8.17.00.00 
  Firmware version                       : 12.00.02.00 
  Channel description                    : 1 Serial Attached SCSI 
  Initiator ID                           : 0 
  Maximum physical devices               : 255 
  Concurrent commands supported          : 4096 
  Slot                                   : 0 
  Segment                                : 0 
  Bus                                    : 1 
  Device                                 : 0 
  Function                               : 0 
  RAID Support                           : Yes 
---------------------------------------------------------------------- 
IR Volume information 
---------------------------------------------------------------------- 
IR volume 1 
  Volume ID                              : 323 
  Volume Name                            : Test01 
  Status of volume                       : Okay (OKY) 
  Volume wwid                            : 0f67f7160eb803a8 
  RAID level                             : RAID1 
  Size (in MB)                           : 761985 
  Physical hard disks                    : 
  PHY[0] Enclosure#/Slot#                : 1:0 
  PHY[1] Enclosure#/Slot#                : 1:1 
---------------------------------------------------------------------- 
Physical device information 
---------------------------------------------------------------------- 
Initiator at ID #0 

Device is a Hard disk 
  Enclosure #                            : 1 
  Slot #                                 : 0 
  SAS Address                            : 4433221-1-0000-0000 
  State                                  : Optimal (OPT) 
  Size (in MB)/(in sectors)              : 763097/1562824367 
  Manufacturer                           : ATA 
  Model Number                           : INTEL SSDSC2BA80 
  Firmware Revision                      : 0150 
  Serial No                              : BTHV511600FN800OGN 
  Unit Serial No(VPD)                    : BTHV511600FN800OGN 
  GUID                                   : 55cd2e404b7b0ab6 
  Protocol                               : SATA 
  Drive Type                             : SATA_SSD 

Device is a Hard disk 
  Enclosure #                            : 1 
  Slot #                                 : 1 
  SAS Address                            : 4433221-1-0100-0000 
  State                                  : Optimal (OPT) 
  Size (in MB)/(in sectors)              : 763097/1562824367 
  Manufacturer                           : ATA 
  Model Number                           : INTEL SSDSC2BA80 
  Firmware Revision                      : 0140 
  Serial No                              : BTHV511504Q1800OGN 
  Unit Serial No(VPD)                    : BTHV511504Q1800OGN 
  GUID                                   : 55cd2e404b7b04d8 
  Protocol                               : SATA 
  Drive Type                             : SATA_SSD 

---------------------------------------------------------------------- 
Enclosure information 
---------------------------------------------------------------------- 
  Enclosure#                             : 1 
  Logical ID                             : 500605b0:01002003 
  Numslots                               : 8 
  StartSlot                              : 0 
---------------------------------------------------------------------- 
SAS2IRCU: Command DISPLAY Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.     

创建和删除RAID

命令功能

创建和删除RAID。(删除命令会删除所有RAID组)

命令格式

sas2ircu controller_id create RAIDlevel capacity enclosure_id:slot_id name noprompt

sas2ircu controller_id delete noprompt

参数说明

参数

参数说明

取值

controller_id

RAID卡的ID

level

要配置的RAID级别

capacity

要配置的RAID组容量

可以为MAX,表示配置RAID组容量最大容量。

enclosure_id

硬盘所在Enclosure的ID

slot_id

硬盘槽位号

name

RAID组的名字

用户自拟

使用指南

使用实例

# 创建RAID组

domino:~# ./sas2ircu 0 create RAID1 MAX 1:0 1:1 Test01 noprompt
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

Please wait, may take up to a minute... 
SAS2IRCU: Volume created successfully. 
SAS2IRCU: Command CREATE Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

# 创建RAID组

domino:~# ./sas2ircu 0 create RAID1 MAX 1:2 1:3 Test01 noprompt
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

Please wait, may take up to a minute... 
SAS2IRCU: Volume created successfully. 
SAS2IRCU: Command CREATE Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

# 删除RAID组

domino:~# ./sas2ircu 0 delete noprompt
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

Please wait, may take up to a minute... 
SAS2IRCU: Volume deleted successfully. 
SAS2IRCU: Command DELETE Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

删除指定的RAID组

命令功能

删除制定的RAID组。

命令格式

sas2ircu controller_id deletevolume volume_id noprompt

参数说明

参数

参数说明

取值

controller_id

RAID卡的ID

volume_id

RAID组ID

使用指南

使用实例

# 删除ID为322的RAID组

domino:~# ./sas2ircu 0 deletevolume 322 noprompt
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

Please wait, may take up to a minute... 
SAS2IRCU: Volume deleted successfully. 
SAS2IRCU: Command DELETEVOLUME Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

模拟硬盘故障

命令功能

模拟硬盘故障。

命令格式

sas2ircu controller_id action enclosure_id:slot_id

参数说明

参数

参数说明

取值

controller_id

RAID卡的ID

action

要执行的操作

  • setonline:上线
  • setoffline:下线

enclosure_id

硬盘所在Enclosure的ID

slot_id

硬盘槽位号

使用指南

使用实例

# 模拟硬盘下线故障。

domino:~# ./sas2ircu 0 setoffline 1:2
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS2IRCU: Physical disk set to Offline successfully. 
SAS2IRCU: Command SETOFFLINE Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

# 模拟硬盘上线故障。

domino:~# ./sas2ircu 0 setonline 1:2
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS2IRCU: Physical disk set to Online successfully. 
SAS2IRCU: Command SETONLINE Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

热备盘的创建和删除

命令功能

创建、删除热备盘。

命令格式

sas2ircu controller_id hotspare enclosure_id:slot_id

sas2ircu controller_id hotspare delete enclosure_id:slot_id

参数说明

参数

参数说明

取值

controller_id

RAID卡的ID

enclosure_id

硬盘所在Enclosure的ID

slot_id

硬盘槽位号

使用指南

使用实例

# 创建热备盘。

domino:~# ./sas2ircu 0 hotspare 1:2
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

WARNING: Proceeding with this operation may cause data loss or data  
         corruption. Are you sure you want to proceed (YES/NO)?yes 
WARNING: This is your last chance to abort this operation. Do you wish  
         to abort (YES/NO)?no 
Please wait,may take up to a minute... 
SAS2IRCU: Hot Spare disk created successfully. 
SAS2IRCU: Command HOTSPARE Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

# 删除热备盘。

domino:~# ./sas2ircu 0 hotspare delete 1:2
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

WARNING: Proceeding with this operation may cause data loss or data  
         corruption. Are you sure you want to proceed (YES/NO)?yes 
WARNING: This is your last chance to abort this operation. Do you wish  
         to abort (YES/NO)?no 
Please wait,may take up to a minute... 
SAS2IRCU: Hot Spare disk deleted successfully. 
SAS2IRCU: Command HOTSPARE Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.     

查看虚拟磁盘状态

命令功能

查看虚拟磁盘状态。

命令格式

sas2ircu controller_id status

参数说明

参数

参数说明

取值

controller_id

RAID卡的ID

使用指南

使用实例

# 查看虚拟磁盘状态。

domino:~# ./sas2ircu 0 status
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

Background command progress status for controller 0... 
IR volume 1 
  Volume ID                              : 323 
  Current operation                      : Background Init 
  volume Status                          : Enabled 
  Volume state                           : Optimal 
  Volume wwid                            : 0307b565aa18c1fb 
  Physical disk I/Os                     : Not quiesced 
  Volume size (in sectors)               : 1560545280 
  Number of remaining sectors            : 1558128640 
  Percentage complete                    : 0.15% 
IR volume 2 
  Volume ID                              : 323 
  Current operation                      : none 
  volume Status                          : Enabled 
  Volume state                           : Optimal 
  Volume wwid                            : 09fb6da3d1048925 
  Physical disk I/Os                     : Not quiesced 
SAS2IRCU: Command STATUS Completed Successfully. 
SAS2IRCU: Utility Completed Successfully. 

一致性检查

命令功能

一致性检查。

命令格式

sas2ircu controller_id constchk volume_id noprompt

参数说明

参数

参数说明

取值

controller_id

RAID卡的ID

volume_id

RAID组的ID

使用指南

使用实例

# 一致性检查

domino:~# ./sas2ircu 0 constchk 322 noprompt
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS2IRCU: Consistency Check Operation started on IR Volume. 
SAS2IRCU: Command CONSTCHK Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

激活RAID组

命令功能

激活RAID组。

命令格式

sas2ircu controller_id activate volume_id

参数说明

参数

参数说明

取值

controller_id

RAID卡的ID

volume_id

待激活RAID组的ID

使用指南

使用实例

# 激活ID为322的RAID组。

domino:~# ./sas2ircu 0 activate 322
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS2IRCU: ACTIVATE Volume 322 Passed! 
SAS2IRCU: Command ACTIVATE Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

点亮硬盘指示灯

命令功能

点亮指定硬盘的指示灯。

命令格式

sas2ircu controller_id locate enclosure_id:slot_id on

参数说明

参数

参数说明

取值

controller_id

RAID卡的ID

enclosure_id

硬盘所在Enclosure的ID

slot_id

硬盘槽位号

使用指南

使用实例

# 点亮指定硬盘的指示灯。

domino:~# ./sas2ircu 0 locate 1:0 on
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS2IRCU: LOCATE command completed successfully. 
SAS2IRCU: Command LOCATE Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

收集和清除RAID组事件日志

命令功能

收集和清除RAID组事件日志。

命令格式

sas2ircu controller_id logir upload name

sas2ircu controller_id logir clear

参数说明

参数

参数说明

取值

controller_id

RAID卡的ID

name

日志文件名

用户自拟

使用指南

使用实例

# 收集RAID组事件日志并存储到本地文件FW.log。

domino:~# ./sas2ircu 0 logir upload FW.log
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS2IRCU: LogIR command successful. 
SAS2IRCU: Command LOGIR Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

# 清除RAID组事件日志。

domino:~# ./sas2ircu 0 logir clear
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

WARNING: proceeding with this operation will erase all log information 
         stored in th controller. Are you sure you want to proceed (YES/NO)? yes 
SAS2IRCU: LogIR command successful. 
SAS2IRCU: Command LOGIR Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

设置指定RAID组作为第一启动项

命令功能

设置指定RAID组作为第一启动项

命令格式

sas2ircu controller_id bootir volume_id

参数说明

参数

参数说明

取值

controller_id

RAID卡的ID

volume_id

待设置为第一启动项的RAID组ID

使用指南

使用实例

# 设置ID为322的RAID组作为第一启动项。

domino:~# ./sas2ircu 0 bootir 322
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS2IRCU: Command BOOTIR Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

设置指定单盘作为第一启动项

命令功能

设置指定单盘作为第一启动项。

命令格式

sas2ircu controller_id bootencl enclosure_id:slot_id

参数说明

参数

参数说明

取值

controller_id

RAID卡的ID

enclosure_id

硬盘所在Enclosure的ID

slot_id

硬盘槽位号

使用指南

使用实例

# 设置指定单盘作为第一启动项

domino:~# ./sas2ircu 0 bootencl 1:4
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS2IRCU: Command BOOTENCL Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

设置指定RAID组作为第二启动项

命令功能

设置指定RAID组作为第二启动项。

命令格式

sas2ircu controller_id bootir volume_id

参数说明

参数

参数说明

取值

controller_id

RAID卡的ID

volume_id

待设置为第二启动项的RAID组ID

使用指南

使用实例

# 设置指定RAID组作为第二启动项。

domino:~# ./sas2ircu 0 altbootir 322
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS2IRCU: Command ALTBOOTIR Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.

设置指定单盘作为第二启动项

命令功能

设置指定单盘作为第二启动项。

命令格式

sas2ircu controller_id altbootencl enclosure_id:slot_id

参数说明

参数

参数说明

取值

controller_id

RAID卡的ID

enclosure_id

硬盘所在Enclosure的ID

slot_id

硬盘槽位号

使用指南

使用实例

# 设置指定单盘作为第二启动项。

domino:~# ./sas2ircu 0 bootencl 1:4
Avago Technologies SAS2 IR Configuration Utility. 
Version 13.00.00.00 (2016.03.08) 
Copyright (c) 2009-2016 Avago Technologies. All rights reserved. 

SAS2IRCU: Command BOOTENCL Completed Successfully. 
SAS2IRCU: Utility Completed Successfully.
翻译
下载文档
更新时间:2019-11-01

文档编号:EDOC1000004345

浏览量:435963

下载量:126778

平均得分:
本文档适用于这些产品
相关版本
相关文档
Share
上一页 下一页