所选语种没有对应资源,请选择:

本站点使用Cookies,继续浏览表示您同意我们使用Cookies。Cookies和隐私政策>

提示

尊敬的用户,您的IE浏览器版本过低,为获取更好的浏览体验,请升级您的IE浏览器。

升级

S9300, S9300E, S9300X V200R010C00 日志参考

本文档介绍了设备支持的日志,内容包含日志信息、日志含义、日志参数、日志原因、日志处理。
评分并提供意见反馈 :
华为采用机器翻译与人工审校相结合的方式将此文档翻译成不同语言,希望能帮助您更容易理解此文档的内容。 请注意:即使是最好的机器翻译,其准确度也不及专业翻译人员的水平。 华为对于翻译的准确性不承担任何责任,并建议您参考英文文档(已提供链接)。
L2V/5/VPLSVSI_UP

L2V/5/VPLSVSI_UP

日志信息

L2V/5/VPLSVSI_UP:The status of the VPLS VSI turned UP. (VsiName=[STRING], Reason=[STRING])

日志含义

VPLS VSI转换为UP状态。

日志参数

参数名称 参数含义
VsiName VSI名称。
Reason 原因,具体内容如下:

1 Invalid reason type

2 VC was created

3 VC was deleted

4 LDP session was Down

5 LDP session was Up

6 Same LDP mapping was received with different label and MTU

7 Same LDP mapping was received with matching interface parameters

8 LDP mapping was received with mismatching interface parameters

9 LDP mapping was received with unpass Cbit check

10 LDP mapping was received with unpass PW loop check

11 New LDP mapping was received

12 New LDP mapping was received but remote Vc or local Vc is Down

13 LDP withdrawn message was received

14 LDP release message was received

15 LDP request message was received

16 LDP GR ended processing

17 RSVP message was received

18 Interface was Up

19 Interface was Down

20 Interface encapsulation changed

21 Refresh

22 Download again

23 Tunnel was Up

24 Tunnel was Down

25 VC state changed when New RLB was received

26 RLB was Deleted

27 VC was created or connected to another remote CE

28 Outgoing interface was unavailable

29 Outgoing interface was available

30 LDP notification message was forwarded

31 LDP notification message was not forwarded

32 PW was recreated

33 Download FTN & ILM for EthernetTrunk

34 AC OAM fault detection was disabled

35 Remote AC fault

36 Remote AC fault was resumed

37 Local AC fault

38 Local AC fault was resumed

39 Remote PSN fault

40 Remote PSN fault was resumed

41 Local PSN fault

42 Local PSN fault was resumed

43 Bfd for pw status changed to Down

44 Bfd for pw status changed to UP

45 Bfd for pw status changed to ADMIN DOWN

46 Bfd for pw was disabled

47 Manual set was enabled

48 Manual set was disabled

49 Delay timed out

50 Resume Timed Out

可能原因

VSI状态UP。

处理步骤

  1. 查看状态转换原因。
翻译
下载文档
更新时间:2019-08-21

文档编号:EDOC1000141517

浏览量:138066

下载量:124

平均得分:
本文档适用于这些产品
相关文档
相关版本
Share
上一页 下一页