配置向日志主机输出Log信息示例

操作步骤

1. 使能信息中心功能

   <Huawei> system-view
   [Huawei] sysname Router
   [Router] info-center enable

2. 配置向日志主机发送Log信息的信息通道和输出规则

   # 命名信息通道。

   [Router] info-center channel 6 name loghost1
   [Router] info-center channel 7 name loghost2
   

   # 配置Log信息输出到日志主机所使用的信息通道。

   [Router] info-center loghost 10.1.1.1 channel loghost1
   [Router] info-center loghost 10.2.1.1 channel loghost2
   [Router] info-center loghost 10.1.1.2 channel loghost1
   [Router] info-center loghost 10.2.1.2 channel loghost2
   

   # 配置向日志主机通道输出Log信息的规则。

   [Router] info-center source fib channel loghost1 log level notification
   [Router] info-center source ip channel loghost1 log level notification
   [Router] info-center source ppp channel loghost2 log level warning
   [Router] info-center source aaa channel loghost2 log level warning

3. 配置发送日志信息的源接口

   # 配置发送Log信息的源接口。

   [Router] info-center loghost source gigabitethernet 1/0/0

4. 在Server端配置日志主机

   # 设备会产生大量的Log信息，而设备本身的存储空间相对有限，就需要配置日志主机实现对设备Log信息的收集。

   # 日志主机可以是安装UNIX或LINUX操作系统的主机，也可以是安装第三方日志软件的主机，具体配置步骤请参见相关手册。

5. 验证配置结果

   # 查看已经配置的日志主机。

   <Router> display info-center
   Information Center: enabled
   Log host:
           the interface name of the source address:GigabitEthernet1/0/0
           10.1.1.1, channel number: 6, channel name: loghost1
           language: english, host facility: local7
           10.2.1.1, channel number: 7, channel name: loghost2
           language: english, host facility: local7
           10.1.1.2, channel number: 6, channel name: loghost1
           language: english, host facility: local7
           10.2.1.2, channel number: 7, channel name: loghost2
           language: english, host facility: local7
   Console:
            channel number : 0, channel name : console
   Monitor:
            channel number : 1, channel name : monitor
   SNMP Agent:
            channel number : 5, channel name : snmpagent
   Log buffer:
           enabled
           max buffer size: 1024, current buffer size: 512
           current messages: 218, channel number: 4, channel name: logbuffer
           dropped messages: 0, overwritten messages: 0
   Trap buffer:
           enabled
           max buffer size: 1024, current buffer size: 256
           current messages: 256, channel number: 3, channel name: trapbuffer
           dropped messages: 0, overwritten messages: 150
   Logfile:
           channel number: 9, channel name: channel9, language: English
   Information timestamp setting:
            log - date, trap - date, debug - boot
   
    Sent messages = 683, Received messages = 682
   

   # 在网管端查看接收到的Log信息。（略）。