所选语种没有对应资源,请选择:

本站点使用Cookies,继续浏览表示您同意我们使用Cookies。Cookies和隐私政策>

提示

尊敬的用户,您的IE浏览器版本过低,为获取更好的浏览体验,请升级您的IE浏览器。

升级

OceanStor Dorado V3系列 V300R002 高级运维命令参考(块业务)

本产品文档适用于OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3和Dorado18000 V3。本文档针对CLI命令行,介绍如何使用CLI设置和管理存储系统,以及按功能分类详细介 绍各命令的使用方法。
评分并提供意见反馈 :
华为采用机器翻译与人工审校相结合的方式将此文档翻译成不同语言,希望能帮助您更容易理解此文档的内容。 请注意:即使是最好的机器翻译,其准确度也不及专业翻译人员的水平。 华为对于翻译的准确性不承担任何责任,并建议您参考英文文档(已提供链接)。
change zone_recycle self_balance

change zone_recycle self_balance

命令功能

change zone_recycle self_balance命令用于设置自均衡的参数。

命令格式

change zone_recycle self_balance info_type=? { zone_type=? type=? level=? [ pool_id=? ] | meta_switch=? data_switch=? [ pool_id=? ] [ window_length=? ] | zone_type=? low_percent=? high_percent=? [ pool_id=? ] | zone_type=? threshold=? [ pool_id=? ] | meta_base_gap=? data_base_gap=? | meta_start_parallel=? data_start_parallel=? } [ controller=? ]

参数说明

参数

参数说明

取值

info_type=?

设置类型。

取值“water”、“smooth”、“smooth_range”、“smooth_threshold”、“smooth_base_gap”、“smooth_start_parallel”或者“balance”,各参数取值说明如下:

  • water:设置指定类型的自均衡水位。
  • smooth:设置自均衡平滑开关和同步时间窗。
  • smooth_range:设置指定Zone的自均衡平滑区间。
  • smooth_threshold:设置指定Zone的自均衡平滑阈值。
  • smooth_base_gap:设置自均衡调整变化粒度。
  • smooth_start_parallel:设置自均衡并发最小起调值。
  • balance:设置自均衡的开关。

pool_id=?

硬盘池ID。

取值为0~31整数,执行“show pool_manager disk_pool”命令获取。

zone_type=?

Zone类型。

取值为“Meta Zone”、“Data Zone”。各参数取值说明如下:

  • Meta Zone:设置Meta Zone的自均衡参数。
  • Data Zone:设置Data Zone的自均衡参数。

type=?

自均衡水位类型。

取值为“start_level”、“stable_level”、“lowest_level”。各参数取值说明如下:

  • start_level:设置自均衡启动水位。
  • stable_level:设置自均衡稳定水位。
  • lowest_level:设置自均衡最低水位。

level=?

自均衡水位。

取值范围为1~100。

meta_switch=?

Meta Zone自均衡开关。

取值“on”或“off”,各参数取值说明如下:

  • “on”:设置Meta Zone自均衡开关打开。
  • “off”:设置Meta Zone自均衡开关关闭。

data_switch=?

Data Zone自均衡开关。

取值“on”或“off”,各参数取值说明如下:

  • “on”:设置Data Zone自均衡开关打开。
  • “off”:设置Data Zone自均衡开关关闭。

low_percent=?

自均衡平滑区间低位。

取值范围为1~100。

high_percent=?

自均衡平滑区间高位。

取值范围为1~100。

threshold=?

自均衡阈值。

取值范围为1~100。

meta_base_gap

Meta Zone的自均衡调整变化粒度。

取值范围为0~100000。

data_base_gap

Data Zone的自均衡调整变化粒度。

取值范围为0~100000。

meta_start_parallel

Meta Zone的自均衡最小起调值。

取值范围为0~2048。

data_start_parallel

Data Zone的自均衡最小起调值。

取值范围为0~2048。

balance_switch

均衡开关。

取值“on”或“off”,各参数取值说明如下:

  • “on”:设置自均衡开关打开。
  • “off”:设置自均衡开关关闭。

controller=?

控制器ID。

取值格式为“XA”,“XB”,“XC”或者“XD”,“X”的取值为0到3的整数,例如“0A”或者“1C”。

window_length=?

自均衡同步时间窗。

取值范围为1~1500000。

视图

研发视图

使用指南

如果指定控制器参数controller,则下发到指定控制器设置,否则命令用于设置当前控制器的自均衡参数。

使用实例

  • 设置指定类型的自均衡水位。
    developer:/>change zone_recycle self_balance info_type=water zone_type=data type=start_level level=11 pool_id=0 
    WARNING: You are about to disable the garbage recycling self-balancing function. 
    This operation will disable the garbage recycling self-balancing function. Storage system performance may deteriorate and services may be interrupted. 
    Suggestion: If the garbage recycling self-balancing function is enabled, disabling this function will disable the automatic adjustment of garbage recycling, affecting the garbage recycling and storage system performance. Confirm that you want to disable this function. 
    Have you read warning message carefully?(y/n)y  
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • 设置控制器A上指定类型的自均衡水位。
    developer:/>change zone_recycle self_balance info_type=water zone_type=data type=start_level level=11 pool_id=0 controller=0A 
    WARNING: You are about to disable the garbage recycling self-balancing function. 
    This operation will disable the garbage recycling self-balancing function. Storage system performance may deteriorate and services may be interrupted. 
    Suggestion: If the garbage recycling self-balancing function is enabled, disabling this function will disable the automatic adjustment of garbage recycling, affecting the garbage recycling and storage system performance. Confirm that you want to disable this function. 
    Have you read warning message carefully?(y/n)y  
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • 设置自均衡平滑开关。
    developer:/>change zone_recycle self_balance info_type=smooth meta_switch=on data_switch=on pool_id=0  
    WARNING: You are about to disable the garbage recycling self-balancing function. 
    This operation will disable the garbage recycling self-balancing function. Storage system performance may deteriorate and services may be interrupted. 
    Suggestion: If the garbage recycling self-balancing function is enabled, disabling this function will disable the automatic adjustment of garbage recycling, affecting the garbage recycling and storage system performance. Confirm that you want to disable this function. 
    Have you read warning message carefully?(y/n)y  
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • 设置控制器A上自均衡平滑开关和同步时间窗。
    developer:/>change zone_recycle self_balance info_type=smooth meta_switch=on data_switch=on pool_id=0 window_length=500 controller=0A 
    WARNING: You are about to disable the garbage recycling self-balancing function. 
    This operation will disable the garbage recycling self-balancing function. Storage system performance may deteriorate and services may be interrupted. 
    Suggestion: If the garbage recycling self-balancing function is enabled, disabling this function will disable the automatic adjustment of garbage recycling, affecting the garbage recycling and storage system performance. Confirm that you want to disable this function. 
    Have you read warning message carefully?(y/n)y  
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • 设置指定Zone的自均衡平滑区间。
    developer:/>change zone_recycle self_balance info_type=smooth_range zone_type=meta low_percent=30 high_percent=40 pool_id=0 
    WARNING: You are about to disable the garbage recycling self-balancing function. 
    This operation will disable the garbage recycling self-balancing function. Storage system performance may deteriorate and services may be interrupted. 
    Suggestion: If the garbage recycling self-balancing function is enabled, disabling this function will disable the automatic adjustment of garbage recycling, affecting the garbage recycling and storage system performance. Confirm that you want to disable this function. 
    Have you read warning message carefully?(y/n)y  
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • 设置控制器A上指定Zone的自均衡平滑区间。
    developer:/>change zone_recycle self_balance info_type=smooth_range zone_type=meta low_percent=30 high_percent=40 pool_id=0 controller=0A 
    WARNING: You are about to disable the garbage recycling self-balancing function. 
    This operation will disable the garbage recycling self-balancing function. Storage system performance may deteriorate and services may be interrupted. 
    Suggestion: If the garbage recycling self-balancing function is enabled, disabling this function will disable the automatic adjustment of garbage recycling, affecting the garbage recycling and storage system performance. Confirm that you want to disable this function. 
    Have you read warning message carefully?(y/n)y  
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • 设置指定Zone的自均衡平滑阈值。
    developer:/>change zone_recycle self_balance info_type=smooth_threshold zone_type=meta threshold=72 pool_id=0 
    WARNING: You are about to disable the garbage recycling self-balancing function. 
    This operation will disable the garbage recycling self-balancing function. Storage system performance may deteriorate and services may be interrupted. 
    Suggestion: If the garbage recycling self-balancing function is enabled, disabling this function will disable the automatic adjustment of garbage recycling, affecting the garbage recycling and storage system performance. Confirm that you want to disable this function. 
    Have you read warning message carefully?(y/n)y  
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • 设置控制器A上指定Zone的自均衡平滑阈值。
    developer:/>change zone_recycle self_balance info_type=smooth_threshold zone_type=meta threshold=72 pool_id=0 controller=0A 
    WARNING: You are about to disable the garbage recycling self-balancing function. 
    This operation will disable the garbage recycling self-balancing function. Storage system performance may deteriorate and services may be interrupted. 
    Suggestion: If the garbage recycling self-balancing function is enabled, disabling this function will disable the automatic adjustment of garbage recycling, affecting the garbage recycling and storage system performance. Confirm that you want to disable this function. 
    Have you read warning message carefully?(y/n)y  
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • 设置自均衡调整变化粒度。
    developer:/>change zone_recycle self_balance info_type=smooth_base_gap meta_base_gap=15 data_base_gap=30 
    WARNING: You are about to disable the garbage recycling self-balancing function. 
    This operation will disable the garbage recycling self-balancing function. Storage system performance may deteriorate and services may be interrupted. 
    Suggestion: If the garbage recycling self-balancing function is enabled, disabling this function will disable the automatic adjustment of garbage recycling, affecting the garbage recycling and storage system performance. Confirm that you want to disable this function. 
    Have you read warning message carefully?(y/n)y  
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • 设置控制器A上自均衡调整变化粒度。
    developer:/>change zone_recycle self_balance info_type=smooth_base_gap meta_base_gap=15 data_base_gap=30 controller=0A 
    WARNING: You are about to disable the garbage recycling self-balancing function. 
    This operation will disable the garbage recycling self-balancing function. Storage system performance may deteriorate and services may be interrupted. 
    Suggestion: If the garbage recycling self-balancing function is enabled, disabling this function will disable the automatic adjustment of garbage recycling, affecting the garbage recycling and storage system performance. Confirm that you want to disable this function. 
    Have you read warning message carefully?(y/n)y  
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • 设置自均衡并发最小起调值。
    developer:/>change zone_recycle self_balance info_type=smooth_start_parallel meta_start_parallel=16 data_start_parallel=8 
    WARNING: You are about to disable the garbage recycling self-balancing function. 
    This operation will disable the garbage recycling self-balancing function. Storage system performance may deteriorate and services may be interrupted. 
    Suggestion: If the garbage recycling self-balancing function is enabled, disabling this function will disable the automatic adjustment of garbage recycling, affecting the garbage recycling and storage system performance. Confirm that you want to disable this function. 
    Have you read warning message carefully?(y/n)y  
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • 设置控制器A上自均衡最小起调值。
    developer:/>change zone_recycle self_balance info_type=smooth_start_parallel meta_start_parallel=16 data_start_parallel=8 controller=0A 
    WARNING: You are about to disable the garbage recycling self-balancing function. 
    This operation will disable the garbage recycling self-balancing function. Storage system performance may deteriorate and services may be interrupted. 
    Suggestion: If the garbage recycling self-balancing function is enabled, disabling this function will disable the automatic adjustment of garbage recycling, affecting the garbage recycling and storage system performance. Confirm that you want to disable this function. 
    Have you read warning message carefully?(y/n)y  
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.

输出说明

无。

翻译
下载文档
更新时间:2019-07-17

文档编号:EDOC1100049100

浏览量:51251

下载量:66

平均得分:
本文档适用于这些产品
相关文档
相关版本
Share
上一页 下一页