所选语种没有对应资源,请选择:

本站点使用Cookies,继续浏览表示您同意我们使用Cookies。Cookies和隐私政策>

提示

尊敬的用户,您的IE浏览器版本过低,为获取更好的浏览体验,请升级您的IE浏览器。

升级

OceanStor Dorado V3系列 V300R002 高级运维命令参考(块业务)

本产品文档适用于OceanStor Dorado3000 V3, Dorado5000 V3, Dorado6000 V3和Dorado18000 V3。本文档针对CLI命令行,介绍如何使用CLI设置和管理存储系统,以及按功能分类详细介 绍各命令的使用方法。
评分并提供意见反馈 :
华为采用机器翻译与人工审校相结合的方式将此文档翻译成不同语言,希望能帮助您更容易理解此文档的内容。 请注意:即使是最好的机器翻译,其准确度也不及专业翻译人员的水平。 华为对于翻译的准确性不承担任何责任,并建议您参考英文文档(已提供链接)。
change disk_nvme_feature general

change disk_nvme_feature general

命令功能

change disk_nvme_feature general命令用于设置NVMe硬盘的单一属性值。

命令格式

change disk_nvme_feature general feature_id=? feature_value=? [ disk_id=? | vendor=? | model=? ]

参数说明

参数

参数说明

取值

feature_id

属性编号。

目前支持七种属性的设置,各属性编号说明如下:

  • 0x2:能耗管理。
  • 0x4:温度阈值。
  • 0x5:错误恢复。
  • 0xB:异步事件配置。
  • 0x81:主机标识。
  • 0x82:预留通知屏蔽。
  • 0x83:预留一致性。

feature_value

属性值。

属性值支持两种64位值的输入形式:

  • 以0x或0X起始的十六进制值。
  • 十进制值。

disk_id

硬盘号。

硬盘号已“框号.槽位号”的形式输入。

vendor

厂商。

-

model

型号。

-

视图

研发视图

使用指南

该命令不支持Dorado5000 V3 (SAS)设备。

该命令适用于OceanStor Dorado3000 V3/Dorado5000 V3存储系统。

使用实例

  • 将所有硬盘属性编号为0x5的属性设置为0x10000。
    developer:/>change disk_nvme_feature general feature_id=0x5 feature_value=0x10000 
    DANGER:You are about to set the values of features related to NVMe disks. This operation may cause system exceptions. 
    Suggestion: Before performing this operation, note the following: 
    1. Ensure that this command is run by the R&D engineers. 
    2. After running this command successfully, settings of features related to NVMe disks will be modified,the disks will no longer possess the attribute assigned by feature settings before this operation. 
    3. After running this command successfully, check whether the disk is running properly. 
    Have you read danger alert message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • 将0号框0号槽位的硬盘属性编号为0x5的属性设置为0x10000。
    developer:/>change disk_nvme_feature general feature_id=0x5 feature_value=0x10000 disk_id=CTE0.0 
    DANGER:You are about to set the values of features related to NVMe disks. This operation may cause system exceptions. 
    Suggestion: Before performing this operation, note the following: 
    1. Ensure that this command is run by the R&D engineers. 
    2. After running this command successfully, settings of features related to NVMe disks will be modified,the disks will no longer possess the attribute assigned by feature settings before this operation. 
    3. After running this command successfully, check whether the disk is running properly. 
    Have you read danger alert message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • 将所有厂商为HUAWEI的硬盘属性编号为0x5的属性设置为0x10000。
    developer:/>change disk_nvme_feature general feature_id=0x5 feature_value=0x10000 vendor=HUAWEI 
    DANGER:You are about to set the values of features related to NVMe disks. This operation may cause system exceptions. 
    Suggestion: Before performing this operation, note the following: 
    1. Ensure that this command is run by the R&D engineers. 
    2. After running this command successfully, settings of features related to NVMe disks will be modified,the disks will no longer possess the attribute assigned by feature settings before this operation. 
    3. After running this command successfully, check whether the disk is running properly. 
    Have you read danger alert message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • 将所有型号为HSSD-0235G6PF的硬盘属性编号为0x5的属性设置为0x10000。
    developer:/>change disk_nvme_feature general feature_id=0x5 feature_value=0x10000 model=HSSD-0235G6PF 
    DANGER:You are about to set the values of features related to NVMe disks. This operation may cause system exceptions. 
    Suggestion: Before performing this operation, note the following: 
    1. Ensure that this command is run by the R&D engineers. 
    2. After running this command successfully, settings of features related to NVMe disks will be modified,the disks will no longer possess the attribute assigned by feature settings before this operation. 
    3. After running this command successfully, check whether the disk is running properly. 
    Have you read danger alert message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.

输出说明

无。

翻译
下载文档
更新时间:2019-07-17

文档编号:EDOC1100049100

浏览量:51789

下载量:66

平均得分:
本文档适用于这些产品
相关文档
相关版本
Share
上一页 下一页