配置普通NTP组播模式示例
在组播域中,指定时钟精度高的设备作为NTP服务器,其他的设备同步服务器的时钟。
组网需求
如图5-4所示。
DeviceC和DeviceD在同一个网段,DeviceA在另一个网段。DeviceF连接这两个网段。
DeviceC作为NTP组播服务器,使用本地时钟作为NTP主时钟,层数为2,从接口GE0/1/0发送组播消息包。
DeviceD和DeviceA分别从各自的接口GE0/1/0侦听组播消息。
本例中interface1和interface2分别代表GE0/1/0和0/2/0。
操作步骤
- 配置各路由器的IP地址
按图5-4配置各接口的IP地址。具体过程略。
- 配置NTP组播服务器
# 配置DeviceC使用本地时钟作为NTP主时钟,层数为2。
<DeviceC> system-view
[~DeviceC] ntp-service refclock-master 2
# 配置DeviceC为NTP组播服务器,从接口GE0/1/0发送NTP组播消息包。
[*DeviceC] interface gigabitethernet 0/1/0
[*DeviceC-GigabitEthernet0/1/0] ntp-service multicast-server
[*DeviceC-GigabitEthernet0/1/0] commit
- 配置与服务器在同一网段的NTP组播客户端DeviceD
# 配置DeviceD为NTP组播客户端,从接口GE0/1/0侦听NTP组播消息包。
<DeviceD> system-view
[~DeviceD] interface gigabitethernet 0/1/0
[~DeviceD-GigabitEthernet0/1/0] ntp-service multicast-client
[*DeviceD-GigabitEthernet0/1/0] commit
- 配置与服务器在不同网段的NTP组播客户端DeviceA
# 配置DeviceA为NTP组播客户端,从接口GE0/1/0侦听NTP组播消息包。
<DeviceA> system-view
[~DeviceA] interface gigabitethernet 0/1/0
[~DeviceA-GigabitEthernet0/1/0] ntp-service multicast-client
[*DeviceA-GigabitEthernet0/1/0] commit
- 使能DeviceF组播功能
<DeviceF> system-view
[~DeviceF] multicast routing-enable
[*DeviceF] commit
[~DeviceF] interface gigabitethernet 0/1/0
[~DeviceF-GigabitEthernet0/1/0] pim sim
[~DeviceF-GigabitEthernet0/1/0] igmp enable
[~DeviceF-GigabitEthernet0/1/0] igmp static-group 224.0.1.1
[*DeviceF-GigabitEthernet0/1/0] commit
[~DeviceF-GigabitEthernet0/1/0] quit
[~DeviceF] interface gigabitethernet 0/2/0
[~DeviceF-GigabitEthernet0/2/0] pim sim
[~DeviceF-GigabitEthernet0/2/0] quit
- 验证配置结果
完成以上配置后,DeviceD能够同步到DeviceC,而DeviceA不能同步到DeviceC。
这是因为DeviceA和DeviceC不在同一个网段,收不到DeviceC发出的组播包。
查看DeviceD的NTP状态,可以看到时钟状态为“synchronized”,即,已经完成同步。时钟的层数为3,比服务器DeviceC低1级。
[~DeviceD] display ntp-service status
clock status: synchronized
clock stratum: 3
reference clock ID: 3.0.1.31
nominal frequency: 60.0002 Hz
actual frequency: 60.0002 Hz
clock precision: 2^18
clock offset: 0.66 ms
root delay: 24.47 ms
root dispersion: 208.39 ms
peer dispersion: 9.63 ms
reference time: 17:03:32.022 UTC Apr 25 2005(C61734FD.800303C0)
synchronization state: clock synchronized
配置文件
DeviceA的配置文件
#
sysname DeviceA
#
interface GigabitEthernet0/1/0
undo shutdown
ip address 1.0.1.11 255.255.255.0
ntp-service multicast-client
#
return
DeviceC的配置文件
#
sysname DeviceC
#
ntp-service refclock-master 2
#
interface GigabitEthernet0/1/0
undo shutdown
ip address 3.0.1.31 255.255.255.0
ntp-service multicast-server
#
return
DeviceD的配置文件
#
sysname DeviceD
#
interface GigabitEthernet0/1/0
undo shutdown
ip address 3.0.1.32 255.255.255.0
ntp-service multicast-client
#
Return
DeviceF的配置文件
#
sysname DeviceF
#
multicast routing-enable
#
interface GigabitEthernet0/1/0
undo shutdown
ip address 1.0.1.2 255.255.255.0
pim sm
#
interface GigabitEthernet0/2/0
undo shutdown
ip address 3.0.1.2 255.255.255.0
pim sm
igmp static-group 224.0.1.1
#
Return