评分并提供意见反馈 :
华为采用机器翻译与人工审校相结合的方式将此文档翻译成不同语言，希望能帮助您更容易理解此文档的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 华为对于翻译的准确性不承担任何责任，并建议您参考英文文档（已提供链接）。
配置TCP测试示例
操作步骤
- 配置各接口的IP地址并配置交换机之间路由可达
# 配置SwitchA。
<Quidway> system-view [Quidway] sysname SwitchA [SwitchA] vlan 100 [SwitchA-vlan100] quit [SwitchA] interface gigabitethernet 1/0/1 [SwitchA-GigabitEthernet1/0/1] port hybrid pvid vlan 100 [SwitchA-GigabitEthernet1/0/1] port hybrid untagged vlan 100 [SwitchA-GigabitEthernet1/0/1] quit [SwitchA] interface vlanif 100 [SwitchA-Vlanif100] ip address 10.1.1.1 24 [SwitchA-Vlanif100] quit [SwitchA] ip route-static 10.2.1.0 255.255.255.0 10.1.1.2
# 配置SwitchB。
<Quidway> system-view [Quidway] sysname SwitchB [SwitchB] vlan 100 [SwitchB-vlan100] quit [SwitchB] vlan 110 [SwitchB-vlan110] quit [SwitchB] interface gigabitethernet 1/0/1 [SwitchB-GigabitEthernet1/0/1] port hybrid pvid vlan 100 [SwitchB-GigabitEthernet1/0/1] port hybrid untagged vlan 100 [SwitchB-GigabitEthernet1/0/1] quit [SwitchB] interface vlanif 100 [SwitchB-Vlanif100] ip address 10.1.1.2 24 [SwitchB-Vlanif100] quit [SwitchB] interface gigabitethernet 1/0/2 [SwitchB-GigabitEthernet1/0/2] port hybrid pvid vlan 110 [SwitchB-GigabitEthernet1/0/2] port hybrid untagged vlan 110 [SwitchB-GigabitEthernet1/0/2] quit [SwitchB] interface vlanif 110 [SwitchB-Vlanif110] ip address 10.2.1.1 24 [SwitchB-Vlanif110] quit
# 配置SwitchC。
<Quidway> system-view [Quidway] sysname SwitchC [SwitchC] vlan 110 [SwitchC-vlan110] quit [SwitchC] interface gigabitethernet 1/0/1 [SwitchC-GigabitEthernet1/0/1] port hybrid pvid vlan 110 [SwitchC-GigabitEthernet1/0/1] port hybrid untagged vlan 110 [SwitchC-GigabitEthernet1/0/1] quit [SwitchC] interface vlanif 110 [SwitchC-Vlanif110] ip address 10.2.1.2 24 [SwitchC-Vlanif110] quit [SwitchC] ip route-static 10.1.1.0 255.255.255.0 10.2.1.1
- 在SwitchC上配置NQA服务器
# 配置NQA服务器TCP连接侦听的IP地址和端口号。
[SwitchC] nqa-server tcpconnect 10.2.1.2 9000 - 在SwitchA配置NQA客户端
# 使能NQA客户端，配置TCP类型的测试例。
[SwitchA] nqa test-instance admin tcp [SwitchA-nqa-admin-tcp] test-type tcp [SwitchA-nqa-admin-tcp] destination-address ipv4 10.2.1.2 [SwitchA-nqa-admin-tcp] destination-port 9000
- 启动测试
[SwitchA-nqa-admin-tcp] start now - 查看测试结果
# 在SwitchA上查看NQA测试结果。
[SwitchA-nqa-admin-tcp] display nqa results test-instance admin tcp NQA entry(admin, tcp) :testflag is inactive ,testtype is tcp 1 . Test 1 result The test is finished Send operation times: 3 Receive response times: 3 Completion:success RTD OverThresholds number: 0 Attempts number:1 Drop operation number:0 Disconnect operation number:0 Operation timeout number:0 System busy operation number:0 Connection fail number:0 Operation sequence errors number:0 RTT Status errors number:0 Destination ip address:10.2.1.2 Min/Max/Average Completion Time: 46/63/52 Sum/Square-Sum Completion Time: 156/8294 Last Good Probe Time: 2012-07-25 16:23:49.1 Lost packet ratio: 0 %
配置文件
SwitchA的配置文件
# sysname SwitchA # vlan batch 100 # interface Vlanif100 ip address 10.1.1.1 255.255.255.0 # interface GigabitEthernet1/0/1 port hybrid pvid vlan 100 port hybrid untagged vlan 100 # ip route-static 10.2.1.0 255.255.255.0 10.1.1.2 # nqa test-instance admin tcp test-type tcp destination-address ipv4 10.2.1.2 destination-port 9000 # return
SwitchB的配置文件
# sysname SwitchB # vlan batch 100 110 # interface Vlanif100 ip address 10.1.1.2 255.255.255.0 # interface Vlanif110 ip address 10.2.1.1 255.255.255.0 # interface GigabitEthernet1/0/1 port hybrid pvid vlan 100 port hybrid untagged vlan 100 # interface GigabitEthernet1/0/2 port hybrid pvid vlan 110 port hybrid untagged vlan 110 # return
SwitchC的配置文件
# sysname SwitchC # vlan batch 110 # interface Vlanif110 ip address 10.2.1.2 255.255.255.0 # interface GigabitEthernet1/0/1 port hybrid pvid vlan 110 port hybrid untagged vlan 110 # nqa-server tcpconnect 10.2.1.2 9000 # ip route-static 10.1.1.0 255.255.255.0 10.2.1.1 # return
