配置MAC Ping测试示例

操作步骤

1. 配置SwitchA和SwitchB之间的MA和MD

   # 配置SwitchA。

   <Quidway> system-view
   [Quidway] sysname SwitchA
   [SwitchA] vlan batch 11
   [SwitchA] interface gigabitethernet 1/0/1
   [SwitchA-GigabitEthernet1/0/1] port hybrid pvid vlan 11
   [SwitchA-GigabitEthernet1/0/1] port hybrid untagged vlan 11
   [SwitchA-GigabitEthernet1/0/1] quit
   [SwitchA] cfm enable
   [SwitchA] cfm md test
   [SwitchA-md-test] ma test
   [SwitchA-md-test-ma-test] map vlan 11
   [SwitchA-md-test-ma-test] mep mep-id 11 interface gigabitethernet1/0/1 outward
   [SwitchA-md-test-ma-test] mep ccm-send mep-id 11 enable
   [SwitchA-md-test-ma-test] remote-mep mep-id 12
   [SwitchA-md-test-ma-test] remote-mep ccm-receive mep-id 12 enable
   [SwitchA-md-test-ma-test] quit
   [SwitchA-md-test] quit
   

   # 配置SwitchB。

   <Quidway> system-view
   [Quidway] sysname SwitchB
   [SwitchB] vlan batch 11
   [SwitchB] interface gigabitethernet 1/0/1
   [SwitchB-GigabitEthernet1/0/1] port hybrid pvid vlan 11
   [SwitchB-GigabitEthernet1/0/1] port hybrid untagged vlan 11
   [SwitchB-GigabitEthernet1/0/1] quit
   [SwitchB] cfm enable
   [SwitchB] cfm md test
   [SwitchB-md-test] ma test
   [SwitchB-md-test-ma-test] map vlan 11
   [SwitchB-md-test-ma-test] mep mep-id 12 interface gigabitethernet1/0/1 outward
   [SwitchB-md-test-ma-test] mep ccm-send mep-id 12 enable
   [SwitchB-md-test-ma-test] remote-mep mep-id 11
   [SwitchB-md-test-ma-test] remote-mep ccm-receive mep-id 11 enable
   [SwitchB-md-test-ma-test] quit
   [SwitchB-md-test] quit

2. 配置SwitchA，使能NQA客户端，配置普通隧道的MAC Ping测试例。

   [SwitchA]nqa test-instance admin macping
   [SwitchA-nqa-admin-macping] test-type macping
   [SwitchA-nqa-admin-macping] md test ma test
   [SwitchA-nqa-admin-macping] destination-address remote-mep mep-id 12

3. 启动测试操作

   [SwitchA-nqa-admin-macping] start now

4. 验证测试结果

   [SwitchA-nqa-admin-macping] display nqa results test-instance admin macping
   
    NQA entry(admin, macping) :testflag is inactive ,testtype is macping
     1 . Test 1 result   The test is finished
      SendProbe:3                          ResponseProbe:3
      Completion:success                   RTD OverThresholds number:0
      OWD OverThresholds SD number:0       OWD OverThresholds DS number:0
      Min/Max/Avg/Sum RTT:3/3/3/9          RTT Square Sum:27
      NumOfRTT:3                           Drop operation number:0
      Operation sequence errors number:0   RTT Stats errors number:0
      System busy operation number:0       Operation timeout number:0
      Min Positive SD:0                    Min Positive DS:0
      Max Positive SD:0                    Max Positive DS:0
      Positive SD Number:0                 Positive DS Number:0
      Positive SD Sum:0                    Positive DS Sum:0
      Positive SD Square Sum:0             Positive DS Square Sum:0
      Min Negative SD:0                    Min Negative DS:0
      Max Negative SD:0                    Max Negative DS:0
      Negative SD Number:0                 Negative DS Number:0
      Negative SD Sum:0                    Negative DS Sum:0
      Negative SD Square Sum:0             Negative DS Square Sum:0
      Min Delay SD:0                       Min Delay DS:0
      Avg Delay SD:0                       Avg Delay DS:0
      Max Delay SD:0                       Max Delay DS:0
      Delay SD Square Sum:0                Delay DS Square Sum:0
      Packet Loss SD:0                     Packet Loss DS:0
      Packet Loss Unknown:0                Average of Jitter:0
      Average of Jitter SD:0               Average of Jitter DS:0
      Jitter out value:0.0000000           Jitter in value:0.0000000
      NumberOfOWD:0                        Packet Loss Ratio: 0%
      OWD SD Sum:0                         OWD DS Sum:0
      ICPIF value: 0                       MOS-CQ value: 0
      TimeStamp unit: ms                   Packet Rewrite Number: 0
      Packet Rewrite Ratio: 0%             Packet Disorder Number: 0
      Packet Disorder Ratio: 0%            Fragment-disorder Number: 0
      Fragment-disorder Ratio: 0%          Jitter OverThresholds SD number:0
      Jitter OverThresholds DS number:0    OverallOverThresholds number:0
      Start time: --
      End time: --