评分并提供意见反馈 :
华为采用机器翻译与人工审校相结合的方式将此文档翻译成不同语言，希望能帮助您更容易理解此文档的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 华为对于翻译的准确性不承担任何责任，并建议您参考英文文档（已提供链接）。
配置ICMP测试示例
配置思路
采用如下思路进行配置：
- 使用NQA ICMP测试功能，测试报文在本端（SwitchA）和指定的目的端（SwitchB）之间是否可达。
- 使用NQA ICMP测试功能，测试报文在本端（SwitchA）和指定的目的端（SwitchB）之间的往返时间。
操作步骤
- 配置SwitchA的IP地址
<Quidway> system-view [Quidway] sysname SwitchA [SwitchA] vlan 100 [SwitchA-vlan100] quit [SwitchA] interface gigabitethernet 1/0/1 [SwitchA-GigabitEthernet1/0/1] port hybrid pvid vlan 100 [SwitchA-GigabitEthernet1/0/1] port hybrid untagged vlan 100 [SwitchA-GigabitEthernet1/0/1] quit [SwitchA] interface vlanif 100 [SwitchA-Vlanif100] ip address 10.1.1.1 24 [SwitchA-Vlanif100] quit
- 配置SwitchB的IP地址
<Quidway> system-view [Quidway] sysname SwitchB [SwitchB] vlan 100 [SwitchB-vlan100] quit [SwitchB] interface gigabitethernet 1/0/1 [SwitchB-GigabitEthernet1/0/1] port hybrid pvid vlan 100 [SwitchB-GigabitEthernet1/0/1] port hybrid untagged vlan 100 [SwitchB-GigabitEthernet1/0/1] quit [SwitchB] interface vlanif 100 [SwitchB-Vlanif100] ip address 10.1.1.2 24 [SwitchB-Vlanif100] quit
- 使能NQA客户端，配置ICMP类型的NQA测试例
[SwitchA] nqa test-instance admin icmp [SwitchA-nqa-admin-icmp] test-type icmp [SwitchA-nqa-admin-icmp] destination-address ipv4 10.1.1.2
- 启动测试
[SwitchA-nqa-admin-icmp] start now - 验证测试结果
[SwitchA-nqa-admin-icmp] display nqa results test-instance admin icmp NQA entry(admin, icmp) :testflag is inactive ,testtype is icmp 1 . Test 1 result The test is finished Send operation times: 3 Receive response times: 3 Completion:success RTD OverThresholds number: 0 Attempts number:1 Drop operation number:0 Disconnect operation number:0 Operation timeout number:0 System busy operation number:0 Connection fail number:0 Operation sequence errors number:0 RTT Status errors number:0 Destination ip address:10.1.1.2 Min/Max/Average Completion Time: 3/125/44 Sum/Square-Sum Completion Time: 132/15650 Last Good Probe Time: 2014-11-28 13:55:52.5 Lost packet ratio: 0 %
配置文件
SwitchA的配置文件
# sysname SwitchA # vlan batch 100 # interface Vlanif100 ip address 10.1.1.1 255.255.255.0 # interface GigabitEthernet1/0/1 port hybrid pvid vlan 100 port hybrid untagged vlan 100 # nqa test-instance admin icmp test-type icmp destination-address ipv4 10.1.1.2 # return
SwitchB的配置文件
# sysname SwitchB # vlan batch 100 # interface Vlanif100 ip address 10.1.1.2 255.255.255.0 # interface GigabitEthernet1/0/1 port hybrid pvid vlan 100 port hybrid untagged vlan 100 # return
