配置测试结果发送到FTP服务器示例

操作步骤

1. 按图6-57配置各接口的IP地址并配置Switch之间路由可达

   <Quidway> system-view

   [Quidway] sysname SwitchA

   [SwitchA] vlan batch 10 20

   [SwitchA] interface gigabitethernet 1/0/1

   [SwitchA-GigabitEthernet1/0/1] port hybrid pvid vlan 20

   [SwitchA-GigabitEthernet1/0/1] port hybrid untagged vlan 20

   [SwitchA-GigabitEthernet1/0/1] quit

   [SwitchA] interface vlanif 20

   [SwitchA-Vlanif20] ip address 10.1.1.11 24

   [SwitchA-Vlanif20] quit

   [SwitchA] interface gigabitethernet 1/0/2

   [SwitchA-GigabitEthernet1/0/2] port hybrid pvid vlan 10

   [SwitchA-GigabitEthernet1/0/2] port hybrid untagged vlan 10

   [SwitchA-GigabitEthernet1/0/2] quit

   [SwitchA] interface vlanif 10

   [SwitchA-Vlanif10] ip address 10.1.2.1 24

   [SwitchA-Vlanif10] quit

   SwitchB的配置请参考配置文件。

2. 在SwitchA配置连接FTP服务器需要的参数

   [SwitchA] nqa-ftp-record ip-address 10.1.2.8

   [SwitchA] nqa-ftp-record username ftp

   [SwitchA] nqa-ftp-record password ftp

   [SwitchA] nqa-ftp-record filename icmp

3. 配置通过FTP保存测试结果到文件的条数

   [SwitchA] nqa-ftp-record item-num 10010

4. 配置通过FTP保存测试结果到文件的时间

   [SwitchA] nqa-ftp-record time 2

5. 配置FTP传送成功向网管端发送Trap

   [SwitchA] nqa-ftp-record trap-enable

6. 在SwitchA使能通过FTP保存NQA测试结果功能

   [SwitchA] nqa-ftp-record enable

7. 使能NQA客户端，配置ICMP类型的NQA测试例

   [SwitchA] nqa test-instance admin icmp

   [SwitchA-admin-icmp] test-type icmp

   [SwitchA-admin-icmp] destination-address ipv4 10.1.1.1

8. 启动测试例

   [SwitchA-admin-icmp] start now

   [SwitchA-admin-icmp] quit

   [SwitchA] quit

9. FTP服务器端启动FTP服务。

   1. 配置FTP用户名、密码，需要和SwitchA上配置的一致。

   2. 配置FTP工作目录。

   3. 开启FTP服务。

10. 查看测试结果

    # 配置成功，可以在设备上查看ICMP测试的结果。

    <SwitchA> display nqa results test-instance admin icmp

    NQA entry(admin, icmp) :testflag is inactive ,testtype is icmp                 
      1 . Test 1 result   The test is finished                                      
       Send operation times: 3              Receive response times: 3               
       Completion:success                   RTD OverThresholds number: 0            
       Attempts number:1                    Drop operation number:0                 
       Disconnect operation number:0        Operation timeout number:0              
       System busy operation number:0       Connection fail number:0                
       Operation sequence errors number:0   RTT Status errors number:0              
       Destination ip address:10.1.1.1                                              
       Min/Max/Average Completion Time: 2/3/2                                       
       Sum/Square-Sum  Completion Time: 7/17                                        
       Last Good Probe Time: 2014-01-14 08:06:29.4                                  
       Lost packet ratio: 0 % 
    

    # 在FTP服务器的工作目录下可以看到.txt文件，就是测试结果文件。