IFNET

IFNET/4/ACOAM_ENABLE_FAIL:Failed to notify Application module of the AC OAM CFG event. (Application=[STRING])

IFNET/5/ACOAM_STATE_CHANGE:The OAM Manager detected interface states change. (InterfaceName=[STRING], State=[STRING])

IFNET/6/APP_NOTIFY_FAULT:The Application module [module] of the interface [interface-name].

IFNET/4/BOARD_DISABLE:Board [board-number] has been unavailable.

IFNET/4/BOARD_ENABLE:Board [board-number] has been available.

IFNET/4/BWRATE_IN_RESUME:Interface input flow bandwidth usage was restored to the log threshold. (Interface=[interface], BandWidthUsage=[usage], LogThreshold=[threshold], InterfaceName=[interfacename])

IFNET/4/BWRATE_IN_RISING:Interface input flow bandwidth usage exceeded the log threshold. (Interface=[interface], BandWidthUsage=[usage], LogThreshold=[threshold], InterfaceName=[interfacename])

IFNET/4/BWRATE_OUT_RESUME:Interface output flow bandwidth usage was restored to the log threshold. (Interface=[interface], BandWidthUsage=[usage], LogThreshold=[threshold], InterfaceName=[interfacename])

IFNET/4/BWRATE_OUT_RISING:Interface output flow bandwidth usage exceeded the log threshold. (Interface=[interface], BandWidthUsage=[usage], LogThreshold=[threshold], InterfaceName=[interfacename])

IFNET/4/CARD_DISABLE:Board [board-number] card [card-number] has been unavailable.

IFNET/4/CARD_ENABLE:Board [board-number] card [card-number] has been available.

IFNET/4/CHANGE_ENCAP:The user performed the configuration that will change the encapsulation protocol of the link and then selected [STRING].

IFNET/4/FLOWDOWN:The state of interface turned to DOWN because of FLOW DOWN. (Interface=[STRING], SysUpTime=[ULONG])

IFNET/4/FLOWUP:The state of interface turned to UP because of FLOW UP. (Interface=[STRING], SysUpTime=[ULONG])

IFNET/4/IF_DISABLE:Interface [interface-name] has been unavailable.

IFNET/4/IF_ENABLE:Interface [interface-name] has been available.

IFNET/4/IF_HOTTASK_CREATE:Task [task-name] has created.

IFNET/4/IF_HOTTASK_DELETE:Task [task-name] has deleted.

IFNET/6/IF_INFO_CHANGE:The interface [interface-name] changed the [property-name] from [old-value] to [new-value].

IFNET/4/IF_STATE:Interface [interface-name] has turned into [state] state.

IFNET/4/LINK_STATE:The line protocol [line-protocol] on the interface [interface-name] has entered the [state] state.

IFNET/4/LINKNO_STATE:The line protocol on the interface [interface-name] has entered the [state] state.

IFNET/6/LSP_STATE_CHANGE:The OAM Manager received the BFD for LSP state changed message. (State=[STRING], Session=[ULONG])

IFNET/4/NOTIFY_BFD_FAIL:Failed to notify Application module of the BFD state change event. (Application=[STRING])

IFNET/4/NTF_ACOAM_STATE_FAIL:Failed to notify Application module of the AC OAM state change event. (Application=[STRING])

IFNET/6/NTF_STATE_CHANGE:The OAM Manager interface fault notify state change. (InterfaceName=[STRING], State=[STRING])

IFNET/4/OUT_OF_MEMORY:Insufficient memory.

IFNET/6/PW_STATE_CHANGE:The OAM Manager received the BFD for PW state changed message. (State=[STRING], Session=[ULONG])

IFNET/6/REPEAT_NOTIFY:The Application module repeatedly notified the fault. (InterfaceName=[STRING], State=[STRING])